Free Cummins 6.7L Webinar Class (About An Hour Long)

[Jwaller]

I own the one shown.

Nice unit.

Yeah, I’m going to have to order that!


2021 Ram 2500 Crew Can SB, Billet Silver Night Edition, Tuned by CCS/EFI Live, 5 position SOTF, 5” exhaust with Aeroturbine 5050xl resonator/muffler, S&B Intake, 295/60’s on stock 20’s.

 0 Comment(s)

[toyota_mdt_tech]

Yeah, I’m going to have to order that!


2021 Ram 2500 Crew Can SB, Billet Silver Night Edition, Tuned by CCS/EFI Live, 5 position SOTF, 5” exhaust with Aeroturbine 5050xl resonator/muffler, S&B Intake, 295/60’s on stock 20’s.

Lots of varying models that look close but don't have a power supply, and the max amp can vary.

So differing grades, but the unit looks the same.

So look for the PWR SUPPLY red LED.

Unit I bought here.

 0 Comment(s)

[AK Bob]

I think AK Bob will find a link and recording to post so that you can catch up, but you won't get the cool certificate.

I'll post one up, and you can photo-shop your name in it.

I don’t know if this link will work for everyone or if it’s attendee specific.

You must enter your first and last name and e-mail address and try it.

This link came with my attendance certificate a few minutes ago.

Edit: Apparently, the link is user-specific and contained my personal information, so I deleted it.

You can still access the “Hand Out” I previously attached here.

 0 Comment(s)

[toyota_mdt_tech]

Certificates are in your mailbox.

I downloaded mine.

Headed to work, I'll edit out the name, and post when I get home from work.

 0 Comment(s)

[z28-50]

Lots of varying models that look close but don't have a power supply, and the max amp can vary.

So differing grades, but the unit looks the same.

So look for the PWR SUPPLY red LED.

Unit I bought here.

FYI, I have NOCO Genius 10.

It has a power supply mode.

Copy and paste from the user guide.

Converts to a DC power supply for powering any 12VDC device, like a tire inflator, oil changer, or as a memory retainer when replacing a battery.

When selected, a red LED will illuminate.13.6V @ 25°C | 10A | Max 12A.

I have mentioned this before about noise being induced and corrupting tunes.

When I was tuning mid 90's Camaro when we used battery chargers/tenders, noise could be induced in the 5V corrupting data.

 0 Comment(s)

[toyota_mdt_tech]

FYI, I have NOCO Genius 10.

It has a power supply mode.

Copy and paste from the user guide.

Converts to a DC power supply for powering any 12VDC device, like a tire inflator, oil changer, or as a memory retainer when replacing a battery.

When selected, a red LED will illuminate.13.6V @ 25°C | 10A | Max 12A.

I have mentioned this before about noise being induced and corrupting tunes.

When I was tuning mid 90's Camaro when we used battery chargers/tenders, noise could be induced in the 5V corrupting data.

A standard battery charger is a 2-phase half-wave rectified, so it's choppy, on, off, on, off; cars use 3 phases in their alternators and a full wave rectifier.

Full wave rectifier will flip over the negative sine wave to positive where a 1/2 wave chops it off, so it's a pulsating DC, not smooth or clean, as you mentioned.

A good battery can act like a capacitor and absorb this, like an electrical shock absorber, but a questionable battery could spell trouble.

 0 Comment(s)