Thanks Thanks:  1
Likes Likes:  11
Results 1 to 3 of 3

Thread: 6.7 coolant up pipe delete.

  1. Top Of Page | #1
    MikeAce's Avatar

    User Info Menu

    6.7 coolant up pipe delete.

    So in the process of rerouting the coolant lines on a 2014 6.7L Cummins.

    Originally the coolant lines all ran up top after the EGzr removal.

    Is it critical to keep that configuration?

    Or would it be ok to run the return lint
    e from the heater core to the new coolant tank.

    The other line from the lower block to the turbo and teed off to the second port on the block?

    Attached Images Attached Images

  2. Likes AK Bob, Corkey, watersupply189, CrazyTrain liked this post
  3. Top Of Page | #2
    I WILL STAND! AK Bob's Avatar

    User Info Menu

    Re: 6.7 coolant up pipe delete.

    I think it should work as you described, but I haven’t tried it.

    I just kept my coolant riser and routed it to the block.

    2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.

  4. Thanks MikeAce thanked for this post
    Likes Corkey, watersupply189, CrazyTrain liked this post
  5. Top Of Page | #3
    MikeAce's Avatar

    User Info Menu

    Re: 6.7 coolant up pipe delete.

    The way I see it, it’s a continuous loop.

    Fingers crossed.

    Thanks,
    Mike Ace


  6. Likes Corkey, AK Bob, watersupply189, CrazyTrain liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •