Oddly enough, RAM uses the same C130 connector on a total 2019 parts truck I had in my backyard.

Technically, it wouldn't be considered "C130" because it was part of the chassis harness, so different locations and wire colors are primarily distinct.

However, the connector housing on both male and female sides is the same, which is all I needed.

As a side note, PLEASE PLEASE learn how to properly release and disconnect whatever type of vehicle electrical connector you are working on before breaking it and turning it into an actual problem.

The connectors on newer vehicles have gotten much more advanced than the old spade connectors crimped on a single wire, but there is a proper way.

You shouldn't need anything more than a pocket screwdriver to release tangs if necessary.

Still, if you are prying on stuff with a 10" flat blade screwdriver, you most likely aren't doing it the proper way intended by the manufacturer.

That is just my opinion, though(venting over).