AlphaOBD - High Idle Function?

[Loud 03]

Does anyone know if the AlphaOBD will turn on the high idle function in our trucks?

2018 RAM 6.7L Cummins 3500


Sent from my iPhone using Tapatalk

 0 Comment(s)

[Crshanta]

It probably might take some digging.

Do you have a Bluetooth obdII module?

Are you not able to configure it on your dash from the factory?

I was able to turn it on when cold.

 0 Comment(s)

[oMegaOrange]

It's enabled from the factory.

Just hit the cruise control On/Off button on the steering wheel and use the +/- buttons to increase or decrease the idle speed.

 0 Comment(s)

[AK Bob]

It's enabled from the factory.

Just hit the cruise control On/Off button on the steering wheel and use the +/- buttons to increase or decrease the idle speed.

Well, you learn something new every day; thanks for the tip.

I tried it this morning on my 2014, and it worked great.

 0 Comment(s)

[Chrisn162001]

If his profile is right, he has a G56 and won’t have high idle from the factory.

If I remember correctly, AlphaOBD won’t do it, and it has to be turned on by the tuner when the tunes are written.


Sent from my iPhone using Tapatalk

 0 Comment(s)

[watersupply189]

I have a G56, and I didn’t think a tuner could turn that feature on.


2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

 0 Comment(s)

[oMegaOrange]

If his profile is right, he has a G56 and won’t have high idle from the factory.

If I remember correctly, AlphaOBD won’t do it, and it has to be turned on by the tuner when the tunes are written.


Sent from my iPhone using Tapatalk

I didn't know that the factory idle feature was just for auto trucks.

That's a big bummer.

I could only find the "Extended Idle" feature in the Warp software, which is when the truck idles up when it's below a certain intake temp.

 0 Comment(s)

[Chrisn162001]

I confirmed with a buddy that it has to be added to the tune.


Sent from my iPhone using Tapatalk

 0 Comment(s)

[Chrisn162001]

I didn't know that the factory idle feature was just for auto trucks.

That's a big bummer. I could only find the "Extended Idle" feature in the Warp software, which is when the truck idles up when it's below a certain intake temp.

Maybe Warp doesn’t have the capability.

Warp lacks features compared to HP Runners and EFI Live.

I have a buddy that uses EZ Lynk, and he adds an idle-up feature when he tunes a manual truck.


Sent from my iPhone using Tapatalk

 0 Comment(s)

[Loud 03]

Yep, no high idle on from the factory, but oh well.


Sent from my iPhone using Tapatalk

 0 Comment(s)