Wires/Sensors After Delete?

[Monath]

Is it okay to cut all the loose wiring/sensors after doing a delete?

 0 Comment(s)

[IGOTACUMMINS]

Is it okay to cut all the loose wiring/sensors after doing a delete?

What wires?

Thank you,
igotacummins

 0 Comment(s)

[Monath]

The wires to the emissions crap that I took off my truck.

The truck is also 2nd gen swapped.

I believe there is a wire for the old VGT turbo as well.

 0 Comment(s)

[AK Bob]

The wires to the emissions crap that I took off my truck.

The truck is also 2nd gen swapped.

I believe there is a wire for the old VGT turbo as well.

I would leave the factory wiring intact secured away from heat, vibration and insulate connections with Shibby plugs or electrical tape.

This will allow a much easier return to stock should there ever be a need.

If this is not a concern, then cut away and insulate the wire ends with caps or tape and heat shrink.

 0 Comment(s)

[Monath]

Thanks.

The truck is never going back to stock.

 0 Comment(s)

[watersupply189]

I would leave all the wiring in place as said above.

You never know if you would ever have to return it to stock and will need the harnesses.


2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

 0 Comment(s)