Thanks Thanks:  2
Likes Likes:  7
Results 1 to 2 of 2

Thread: RaceME Ultra Will Not Power Up?

  1. Top Of Page | #1
    bebop86's Avatar

    User Info Menu

    RaceME Ultra Will Not Power Up?

    Guys, I went to plug in the Ultra (I disconnected after putting in a new program a couple of years ago).

    Anyway, it will not power up; it is just a black screen checked OBD and plugged in.

    I noticed where the USB plugs into the back of the Ultra are loose and wiggling around.

    Any ideas?

    Thanks


  2. Thanks IGOTACUMMINS thanked for this post
  3. Top Of Page | #2
    I WILL STAND! AK Bob's Avatar

    User Info Menu

    Re: RaceME Ultra Will Not Power Up?

    Check to ensure the battery voltage is on pin #16 of the OBD port (bottom row, right side).

    You could try a different cable, but if the female connector on the RaceME is damaged, you will need to contact RaceME for repair.

    If you don’t want to go that route, you could check with a local electronics repair shop.

    2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.

  4. Thanks Corkey thanked for this post
    Likes watersupply189, Corkey, B69NoDEF liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •