Thanks Thanks:  2
Likes Likes:  7
Results 1 to 2 of 2

Thread: Fuel Return Line Sizes?

  1. Top Of Page | #1
    Suarezga3360's Avatar

    User Info Menu

    Fuel Return Line Sizes?

    I hope this isn’t a dumb question.

    I just installed a Fleece fuel filter delete block and have a small leak on the fuel return line at the quick connector and nylon line.

    What size is that nylon return line ID & OD?


  2. Thanks IGOTACUMMINS thanked for this post
  3. Top Of Page | #2
    Watch Dog! Corkey's Avatar

    User Info Menu

    Re: Fuel Return Line Sizes?

    Your kit probably came as this.

    • (2) Push Lock CP3 Feed Fittings
    • (1) -6AN to M12 Fitting
    • (3) 12mm sealing washers
    • (2) -8AN 90? to Push Lock Fittings
    • (1) -8AN 45? to Push Lock Fitting
    • (1) -6AN 90? to Push Lock Fitting
    • (1) -6AN 120? to Push Lock Fitting
    • (3.5’) -8AN (1/2”) Push Lock Hose
    • (2’) -6AN (3/8”) Push Lock Hose

    II 60HP STICKS, II 33% CP3, II S464 2ND GEN SWAP, FASS 165 TITANIUM SIGNATURE SERIES, AFE INTAKE HORN, S&B FILTER, 5" TURBO BACK, ALPHAREX HEAD LIGHTS, 38X13.5X20 RAZOR M/T, MOTO METAL RIMS, 6" LA LIFT KIT, COMPLET MM3 KIT, BUILT TRANSMISSION, 6 BOLT REDHEAD STEERING BOX

  4. Thanks IGOTACUMMINS thanked for this post
    Likes AK Bob, watersupply189, IGOTACUMMINS liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •