I Need Help Please - Fuel Rail?

**bahl74** · 08-06-2022

I'm going to put it all back together and torque everything to specs and

. I probably should have start by saying I did a grid heater delete and when I put it back together is when this problem came to be

Sent from my SM-N981U using Tapatalk

0 Comment(s)

**bahl74** · 08-06-2022

So I should be good if I get the line seated correctly

Sent from my SM-N981U using Tapatalk

0 Comment(s)

**AK Bob** · 08-06-2022

Originally Posted by Chrisn162001

Yes, look into the opening on the rail. There is an open spot where fuel will leak to the bottom of the fitting when the injector line flare is not pressing against the rails.

Sent from my iPhone using Tapatalk

Thanks @Chrisn162001 great catch. Appreciate your expertise, we continue to learn something new every day.

0 Comment(s)

**Chrisn162001** · 08-06-2022

Originally Posted by bahl74

I'm going to put it all back together and torque everything to specs and

. I probably should have start by saying I did a grid heater delete and when I put it back together is when this problem came to be

Sent from my SM-N981U using Tapatalk

I would torque the feed tubes anytime you take the lines off. The can loosen a bit when you loosen the lines.

I go 47 foot pounds on the feed tubes.

Sent from my iPhone using Tapatalk

0 Comment(s)

**Chrisn162001** · 08-06-2022

Originally Posted by AK Bob

Thanks @Chrisn162001 great catch. Appreciate your expertise, we continue to learn something new every day.

Not a problem just wanted to catch him before he paid $200 plus for a rail that’s going to do the same thing.

Sent from my iPhone using Tapatalk

0 Comment(s)

**AK Bob** · 08-06-2022

Originally Posted by bahl74

I'm going to put it all back together and torque everything to specs and

. I probably should have start by saying I did a grid heater delete and when I put it back together is when this problem came to be

Sent from my SM-N981U using Tapatalk

It’s possible you have disturbed the injector crossover tubes and may need need to re-torque them.

0 Comment(s)

**Corkey** · 08-06-2022

My bad

0 Comment(s)

**Chrisn162001** · 08-06-2022

Found a picture online.

You can see the threaded portion has an opening around the flare portion.

That’s where the fuel is pushing out when you put the cap on.

Sent from my iPhone using Tapatalk

0 Comment(s)