I put a used set of BD compounds on my truck, and the EGT seems to be way too hot.
I believe they are towing twins; the truck has a fast lift pump, undetermined injector size(numbers on bodies look factory), and 4.10 gearing with 35" tires.
I leaked to the exhaust outlet and hot pipe V band for the top turbo I could not get to seal, I wrapped the V band in foil, and that seemed to take care of it; I cannot see smoke pouring out from under the hood any more when stepping on it.
I attached a photo of the EGT temp and boost number cruising along with just enough pedal to keep the truck at 60mph.
Any thoughts on what to look for before I pull this stuff off and put my old setup back on?
Bookmarks