Thanks Thanks:  7
Likes Likes:  9
Results 1 to 4 of 4

Thread: Injector Identification?

  1. Top Of Page | #1
    Bs702's Avatar

    User Info Menu

    Injector Identification?

    Hey friends, I've got my truck all torn apart and am currently getting ready to put a set of compound turbos on; the #6 cylinder lower manifold bolt broke when I was pulling it, so I ended up pulling the head off the truck to make things easier extracting it.

    In the midst, I pulled the injectors out of the head and could use some help identifying them; when I run the part number, I can see that they are Bosch but not the size.

    They were claimed to be oversized before I bought the truck but I would like to know for sure as I will be upgrading those as well if they are factory size.

    They are seven-hole; I attached a photo with the numbers on the sides; 4830 is also across the top of the bodies.

    Attached Images Attached Images
    2010 6.7 (diet version) MM3, 6" lift, 22x14 with 37x13.50

    2001 5.9 24v
    -4" exhaust
    -studded
    -Quadzilla Adrenaline

  2. Thanks IGOTACUMMINS thanked for this post
    Likes AK Bob, IGOTACUMMINS liked this post
  3. Top Of Page | #2
    I WILL STAND! AK Bob's Avatar

    User Info Menu

    Re: Injector Identification?

    Hopefully, someone can help identify them.

    Have you tried contacting Bosch?

    https://www.bosch.us/contact/

    2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.

  4. Thanks IGOTACUMMINS, Bs702 thanked for this post
    Likes IGOTACUMMINS, Bs702 liked this post
  5. Top Of Page | #3
    Permanent Vacation Chrisn162001's Avatar

    User Info Menu

    Re: Injector Identification?

    Have to get them flow tested if you want to know their size.


    Sent from my iPhone using Tapatalk


  6. Thanks IGOTACUMMINS, Bs702, AK Bob thanked for this post
    Likes IGOTACUMMINS, Bs702, AK Bob liked this post
  7. Top Of Page | #4
    Bs702's Avatar

    User Info Menu

    Re: Injector Identification?

    I just reached out to Bosch, and we'll see what they say.

    I will get them flow tested if I can find a shop locally to do it.

    2010 6.7 (diet version) MM3, 6" lift, 22x14 with 37x13.50

    2001 5.9 24v
    -4" exhaust
    -studded
    -Quadzilla Adrenaline

  8. Thanks IGOTACUMMINS thanked for this post
    Likes IGOTACUMMINS, AK Bob liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •