Thanks Thanks:  41
Likes Likes:  124
Page 1 of 5 123 ... LastLast
Results 1 to 10 of 41

Thread: Airaid Modular Intake Tube?

  1. Top Of Page | #1
    Ed Smith's Avatar

    User Info Menu

    Airaid Modular Intake Tube?

    Has anybody swapped their stock air intake tube for the Airaid Modular Intake Tube?

    If so, what were the results?

    I was mainly talking on a 4th Gen.

    I know there are alot of fans of the S&B Cold Air Intakes, but it seems to me that by adding the Airaid intake tube to the factory RAM Active Air, you would be pretty close to an aftermarket cold air intake set up.

    Thanks.


  2. Thanks IGOTACUMMINS thanked for this post
    Likes watersupply189, IGOTACUMMINS, AK Bob liked this post
  3. Top Of Page | #2
    CrazyTrain's Avatar

    User Info Menu

    Re: Airaid Modular Intake Tube?

    Quote Originally Posted by Ed Smith View Post
    Has anybody swapped their stock air intake tube for the Airaid Modular Intake Tube?

    If so, what were the results?

    I was mainly talking on a 4th Gen.

    I know there are alot of fans of the S&B Cold Air Intakes, but it seems to me that by adding the Airaid intake tube to the factory RAM Active Air, you would be pretty close to an aftermarket cold air intake set up.

    Thanks.
    What engine?

    The connection between scoop and airbox on the diesel is the most significant difference going from stock to aftermarket (S&B or banks).

    2021 Ram 3500 DRW, H.O., bypass oil filtration, bypass coolant filtration, S&B CAI, 4:10’s
    2wd low loc kit.
    Reacquired 2001 3500, 5.9 nv4500, dually cab and chassis, 5” straight pipe, edge juice w/attitude. Otherwise all stock…..for now.

  4. Thanks IGOTACUMMINS thanked for this post
    Likes IGOTACUMMINS, AK Bob, watersupply189 liked this post
  5. Top Of Page | #3
    Ed Smith's Avatar

    User Info Menu

    Re: Airaid Modular Intake Tube?

    Quote Originally Posted by CrazyTrain View Post
    What engine?

    The connection between scoop and airbox on the diesel is the most significant difference going from stock to aftermarket (S&B or banks).
    6.7 Cummins.

    The Airaid tube seems to provide an air intake tube very similar to current aftermarket offerings by Banks and S&B, plus you can get the tube from Airaid for $179.

    I don't see a considerable change between the factory air box and an aftermarket one since both the Banks and the S&B use the factory air inlet gate.

    I guess what I am trying to say is both of the aftermarket offerings have the same air inlet port in the airbox itself; the significant difference is the air tube going to the turbo.


  6. Thanks IGOTACUMMINS thanked for this post
    Likes IGOTACUMMINS, AK Bob, watersupply189 liked this post
  7. Top Of Page | #4
    CrazyTrain's Avatar

    User Info Menu

    Re: Airaid Modular Intake Tube?

    I see you have a 2016; I referred to the 19-21 trucks.

    I should have paid better attention.

    You are correct.

    2021 Ram 3500 DRW, H.O., bypass oil filtration, bypass coolant filtration, S&B CAI, 4:10’s
    2wd low loc kit.
    Reacquired 2001 3500, 5.9 nv4500, dually cab and chassis, 5” straight pipe, edge juice w/attitude. Otherwise all stock…..for now.

  8. Thanks IGOTACUMMINS thanked for this post
  9. Top Of Page | #5
    JMueth2020's Avatar

    User Info Menu

    Re: Airaid Modular Intake Tube?

    I have a 2018 3500 G56 with an Airaid tube.

    I also have Banks' intake.

    I don't know why my truck doesn't run correctly with Banks'.

    I have tried all kinds of things but no luck.

    Banks' is louder, turbocharger and exhaust brake.

    My setup is KN filter in oem box with Airaid charger pipe.

    As for the Airaid, it is better than all stock.


  10. Thanks IGOTACUMMINS thanked for this post
    Likes watersupply189, AK Bob, IGOTACUMMINS liked this post
  11. Top Of Page | #6
    Ed Smith's Avatar

    User Info Menu

    Re: Airaid Modular Intake Tube?

    Quote Originally Posted by JMueth2020 View Post
    I have a 2018 3500 G56 with an Airaid tube.

    I also have Banks' intake.

    I don't know why my truck doesn't run correctly with Banks'.

    I have tried all kinds of things but no luck.

    Banks' is louder, turbocharger and exhaust brake.

    My setup is KN filter in oem box with Airaid charger pipe.

    As for the Airaid, it is better than all stock.
    What do you mean with the Banks Intake, your truck doesn't correctly run?

    The Banks intake was something I was thinking about in the future, as well as the boost tubes and inner cooler.

    I haven't noticed a substantial difference with the Airaid Tube, but I got the sound dampener out to keep the foam from getting into the turbo.


  12. Thanks IGOTACUMMINS thanked for this post
    Likes watersupply189, AK Bob, IGOTACUMMINS liked this post
  13. Top Of Page | #7
    JMueth2020's Avatar

    User Info Menu

    Re: Airaid Modular Intake Tube?

    A bit difficult to explain but here goes.

    A couple instances.

    One is when i am cruising at a constant speed but barely pressing the fuel pedal.

    An example would be on a flat road at 70mph and barely touching the pedal.

    A second instance is when i shift 1st to 2nd: the point at which I initially press the fuel pedal to speed up after engaging the clutch for 2nd.

    What occurs is a stutter or hesitation.

    I believe the issue has something to do with the air velocity or pressure difference and prob at the location of sensors on Banks’ intake.

    But the few people iv spoken with for support have not heard of this issue.

    At this point, I give up.

    On a different note, I recently installed the intercooler tubes, ram manifold horn, and grid delete manifold plate.

    The difference now vs. before is a little.

    For example, spooling comes on sooner and smoother, with a quicker acceleration.


  14. Thanks watersupply189, IGOTACUMMINS thanked for this post
    Likes watersupply189, AK Bob, IGOTACUMMINS liked this post
  15. Top Of Page | #8
    MOD watersupply189's Avatar

    User Info Menu

    Re: Airaid Modular Intake Tube?

    Is your K&N air filter oil or dry?

    If it’s oiled, I would yank that thing out.

    Oil from the filter will get sucked into the turbo and clog up the sensor.

    Have you tried removing the Banks and installing your old one to see if that’s the issue?


    2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

    2016 RAM 3500 4x4 Laramie Crew Cab ,G56

  16. Thanks IGOTACUMMINS thanked for this post
    Likes AK Bob, IGOTACUMMINS liked this post
  17. Top Of Page | #9
    JMueth2020's Avatar

    User Info Menu

    Re: Airaid Modular Intake Tube?

    I’ve swapped out different things.

    No luck.


  18. Thanks IGOTACUMMINS thanked for this post
    Likes AK Bob, IGOTACUMMINS, watersupply189 liked this post
  19. Top Of Page | #10
    MOD watersupply189's Avatar

    User Info Menu

    Re: Airaid Modular Intake Tube?

    Can you explain what different things you swapped out?


    2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

    2016 RAM 3500 4x4 Laramie Crew Cab ,G56

  20. Thanks IGOTACUMMINS thanked for this post
    Likes IGOTACUMMINS, AK Bob, Corkey liked this post
Page 1 of 5 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •