Have you been wanting radius arm ride quality with the ability to clear up to 40" tires on a control arm truck?

The wait is finally over......

Introducing the Firch Fabworks 1994-2013 Dodge Ram 2500/3500 Radius Arm Conversion ONLY available at DDP Motorsports!!!

Firch Fab radius arms offer an incomparable improvement to ride quality, comfort and stability
over the factory suspension platform. Drastically improving bump steer and roll steer throughout the
entire suspension cycle. Slow speed and around town driving is a night and day difference from the
stock control arm platform. Once ramped up to freeway speeds or high speeds off road, you as the
driver will feel the difference. Stability, comfort, and drive confidence is assured.

These radius arms will clear a 37” tire with ANY wheel option on any generation dodge. Once
tire sizes increase to 40” a minimum of 4.75” on a 9” wide wheel is required to clear with no rub.
Designed to work from 0” to 4” of lift height.

Strength and integrity do not go by the wayside either. Boasting a full 3/16” outside wall
thickness, with multi directional internal bracing running the entire length of the arm. These radius
arms have survived detrimental vehicle impacts with absolutely no loss of integrity to the structure.

Maintains factory CAM adjustment bolts for easy alignments. With the added feature of an
adjustable upper arm, axle location and camber adjustment is almost limitless. The pocket where the
upper arm ties into the lower radius arm is notched to allow for ease of Jam nut re torque. This pocket
also has a drain hole to avoid water/moisture buildup.

firch 3.jpg

https://ddpmotorsports.com/i-30547967?q=FIRCH

866-895-3833

sales@ddpmotorsports.com