TPMS Sensor Issue?

[watersupply189]

Perfect, thank you also.

Before ordering anything, I'll make sure to either input my VIN for reference or call the dealership to confirm the correct part.

Thanks again!

Awesome!

Keep us informed what part number it turns out to be.


2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

 0 Comment(s)

[jgruberman]

My research comes up with Mopar 68324960AB.

https://store.Mopar.com/oem-parts/Mo...sor-68324960ab

Edit: The link is not working, but you will see the attached if you go there and type in 68324960AB.

Attachment 14359

I typed my VIN into MyMoparParts.com (local to me), and they brought up this same Model # 68324960AB.

Sent from my SM-G986U using Tapatalk

 0 Comment(s)

[AK Bob]

I typed my VIN into MyMoparParts.com (local to me), and they brought up this same Model # 68324960AB.

Sent from my SM-G986U using Tapatalk

Pleased to hear you were able to confirm.

While checking, I found many different part numbers superseded others.

On my 2014 Dually, the “rear inner” pressure sensors have a different P/N from all the rest.

 0 Comment(s)

[jgruberman]

Nope, have them installed and drive a few miles, and they should calibrate.

The tire must be separated from the rim to get the valve stem sensor replaced.

Unfortunately, the sensors are a throw away once the battery dies.


2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

Follow-up question to this.

I called a small local shop, and it says they need to program these; what are they talking about?

Maybe they think my sensors are aftermarket ones that need programming, whereas the Mopar ones don't?

Sent from my SM-S908U using Tapatalk

 0 Comment(s)

[watersupply189]

Follow-up question to this.

I called a small local shop, and it says they need to program these; what are they talking about?

Maybe they think my sensors are aftermarket ones that need programming, whereas the Mopar ones don't?

Sent from my SM-S908U using Tapatalk

Get the Mopar one aftermarkets may or may not Bluetooth to the truck.

The only program I know of is driving the truck, which will calibrate on its own after a few miles.


2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

 0 Comment(s)

[jgruberman]

Get the Mopar one aftermarkets may or may not Bluetooth to the truck.

The only program I know of is driving the truck, which will calibrate on its own after a few miles.


2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

Oh, I already did

I just wanted to ask to be prepared if the shop thinks they need extra work.



Sent from my SM-S908U using Tapatalk

 0 Comment(s)

[watersupply189]

Oh, I already did

I just wanted to ask to be prepared if the shop thinks they need extra work.

https://uploads.tapatalk-cdn.com/202...d01e8a49fe.jpg

Sent from my SM-S908U using Tapatalk

As far as I know, nothing needs to be programmed.

I never had to with my truck.

I had them installed in the rims, and they worked great after a few miles of driving.


2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

 0 Comment(s)

[AK Bob]

Oh, I already did

I just wanted to ask to be prepared if the shop thinks they need extra work.

https://uploads.tapatalk-cdn.com/202...d01e8a49fe.jpg

Sent from my SM-S908U using Tapatalk

Agree with @watersupply189 see attached PDF.

They should not be charging to program the sensors.

 0 Comment(s)

[jgruberman]

To follow up on this as the OP, they immediately synced up (with 0 or incorrect PSI), and after a mile or two, they all updated correctly on their own.

Sent from my SM-S908U using Tapatalk

 0 Comment(s)

[watersupply189]

To follow up on this as the OP, they immediately synced up (with 0 or incorrect PSI), and after a mile or two, they all updated correctly on their own.

Sent from my SM-S908U using Tapatalk

Glad you got it fixed.


2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

 0 Comment(s)