Thanks: 26
Likes: 93
I finally figured out the source of my creaking sound when I turned my wheel.
Now can someone tell me what the heck it is?
I'm not too familiar with steering components.
If that matters, it's a 2014 RAM 2500 with a Pro Comp 4" lift.
Perhaps anyone can identify a part number online?
Sent from my SM-G986U using Tapatalk
IGOTACUMMINS thanked for this post
That would be the passenger side tie rod end.
I'm guessing based on what I've been seeing, that I need to replace the entire bar?Originally Posted by TurboWhistle
Sent from my SM-G986U using Tapatalk
IGOTACUMMINS thanked for this post
https://www.synergymfg.com/synergy-d...-rod-ends.html
or
https://www.synergymfg.com/synergy-1...y-tie-rod.html if you have the money.
You'll need an alignment done to get proper wear on the tires.
II 60HP STICKS, II 33% CP3, II S464 2ND GEN SWAP, FASS 165 TITANIUM SIGNATURE SERIES, AFE INTAKE HORN, S&B FILTER, 5" TURBO BACK, ALPHAREX HEAD LIGHTS, 38X13.5X20 RAZOR M/T, MOTO METAL RIMS, 6" LA LIFT KIT, COMPLET MM3 KIT, BUILT TRANSMISSION, 6 BOLT REDHEAD STEERING BOX
IGOTACUMMINS thanked for this post
Forgive my ignorance, but I don't see any way anything screws into this.
Am I missing something?
Yellow circle.
Sent from my SM-G986U using Tapatalk
IGOTACUMMINS thanked for this post
I'm not familiar with the newer Cummins
Let me do some research for you.
I thought it was the same; the pic, it does look like a solid piece, but that doesn't make sense to me.
II 60HP STICKS, II 33% CP3, II S464 2ND GEN SWAP, FASS 165 TITANIUM SIGNATURE SERIES, AFE INTAKE HORN, S&B FILTER, 5" TURBO BACK, ALPHAREX HEAD LIGHTS, 38X13.5X20 RAZOR M/T, MOTO METAL RIMS, 6" LA LIFT KIT, COMPLET MM3 KIT, BUILT TRANSMISSION, 6 BOLT REDHEAD STEERING BOX
IGOTACUMMINS thanked for this post
I don't believe you can replace just the tie rod.
I would recommend a Synergy mfg one as well.
You would need the whole assembly, but it would allow you in the future to replace only the worn-out one.
I believe you are correct; if you want to stay with the factory-style bar, you will need to replace it.
If you upgrade to the Synergy bar, then you will have the option to replace the ends if necessary at a later date.
https://www.partsgeek.com/catalog/20...g/tie_rod.html
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.
If I upgrade to the Synergy one, I'm guessing I lose the steering dampener on the factory bar?
Sent from my SM-G986U using Tapatalk
IGOTACUMMINS thanked for this post
Sure does look like you would need to order the bracket and shock separate.
The instructions don’t address installing the bracket and shock.
Strange, they do picture both with the bar.
I would give them a call before ordering; please keep us posted.
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.
IGOTACUMMINS thanked for this post
Posting Permissions
Register To Reply
Bookmarks