New Member Houston, TX

[D-LUX]

Hey all, I am looking forward to getting back into the know with these trucks.

I cut my teeth on a VP-powered 01 QCSB; it was a fun 450ish HP 5-speed truck.

I did a ton of fab work on the suspension and it had the usual combo towards the end of its life with me.

7x.010 VCOs, Ported HE351, TST comp with the usual supporting mods.

I had a 12V single cab dually for a bit, again had a pretty typical setup, 4ks, 0-plate slid full-forward, massaged the HX-35.

It was a hot smokey mess but still fun to drive.

I have been out of the diesel game for quite a bit but did get into a 2018 auto 4x4, its mostly stock save for tuning from GDP, a leveling kit, and 295/60r20's

Thanks for looking & I hope to get back into the swing of things when it comes to messing with these trucks.

Pics of all 3 coming shortly.

 0 Comment(s)

[D-LUX]

Here you go.

 0 Comment(s)

[watersupply189]

Hey all, I am looking forward to getting back into the know with these trucks.

I cut my teeth on a VP-powered 01 QCSB; it was a fun 450ish HP 5-speed truck.

I did many fabs work on the suspension and had the usual combo towards the end of its life with me.

7x.010 VCOs, Ported HE351, TST comp with the usual supporting mods.

I had a 12V single cab dually for a bit, again had a pretty typical setup, 4ks, 0-plate slid full-forward, massaged the HX-35.

It was a hot smokey mess but still fun to drive

I have been out of the diesel game for quite a bit but did get into a 2018 auto 4x4, its mostly stock save for tuning from GDP, a leveling kit, and 295/60r20's

Thanks for looking & I hope to get back into the swing of things when it comes to messing with these trucks.

Pics of all 3 coming shortly.

Welcome friend, glad to have you here.


2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

 0 Comment(s)

[Corkey]

Nice rig bud.

You'll enjoy the forums!

 0 Comment(s)

[D-LUX]

Thanks!!

I wish Photobucket didn't do what they did a few years back; otherwise, I'd still have quite a few build pics of the radius arm setup on the VP truck, but it is what it is.

If there's any interest, I can try to dig up some of the old photos.

 0 Comment(s)

[watersupply189]

Clean truck.


2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

 0 Comment(s)

[D-LUX]

Thanks, probably should've kept that one

 0 Comment(s)

[AK Bob]

Welcome!

 0 Comment(s)

[AnOldBiker]

@D-LUX

 0 Comment(s)

[Power247]

Welcome!

That's a clean 2ng Gen.

I always wanted to build one.

Greg
2019 | RAM 2500 | CCSB | 6.4 HEMI
2016 | Heartland Pioneer | DS310

 0 Comment(s)