I don’t know about 2010, but on my 2021, I do not have # of axles as a choice, heavy electric, electric, electric over hydraulic, I believe that’s it.
I save trailers for my settings for each, although those change with loads hauled.
Thanks: 28
Likes: 86
I don’t know about 2010, but on my 2021, I do not have # of axles as a choice, heavy electric, electric, electric over hydraulic, I believe that’s it.
I save trailers for my settings for each, although those change with loads hauled.
2021 Ram 3500 DRW, H.O., bypass oil filtration, bypass coolant filtration, S&B CAI, 4:10’s
2wd low loc kit.
Reacquired 2001 3500, 5.9 nv4500, dually cab and chassis, 5” straight pipe, edge juice w/attitude. Otherwise all stock…..for now.
Originally Posted by CrazyTrain
C/T, where do you access those settings or adjustments?
I dont see them, but I have not plugged in my trailer either.
I assume in the EVIC, via the steering wheel controls when plugged in?
I had an LR brake light out (LED on my trailer), so I will probably hook the truck up to check to see if the new lamps fixed it and will check brake control settings.
I suspect mine is the default in heavy electric, and I need light.
My controller worked fine without the network seeing it but I was not able to config, just heavy.
My enclosed trailer probably doesn't see over 5000 lbs with my gear in it.
#CrazyTrain
2010 Dodge 2500 SLT CCLB 4WD G56 Cummins 6.7 turbo diesel, 3.42 LSD. Add ons: Banks Monster Ram, Grid heater delete, Spyntec Free Spin Kit with Warn hubs (62672) Laramie Alloys (includes spare), "Powerwagon" Flares, Powerwagon bed decal (4X4 off road) OE Ram mudflaps, OE Slush Mats, OE Clearance Lamps, Geno's shift knob in black, 5" DPF back with muffler delete, spray in bedliner, OE brake controller, Durafit Seat Covers, Pro Tech Toolbox, Speed Turtle, Upfitter switches, Ham Radios, 8 Antennas, headache rack, emergency light bar,....
IGOTACUMMINS thanked for this post
Center stack, settings, trailer, under the trailer, you get braking options and can name the trailer.
You can do this in the center stack without the trailer hooked up.
2021 Ram 3500 DRW, H.O., bypass oil filtration, bypass coolant filtration, S&B CAI, 4:10’s
2wd low loc kit.
Reacquired 2001 3500, 5.9 nv4500, dually cab and chassis, 5” straight pipe, edge juice w/attitude. Otherwise all stock…..for now.
OK, under mine, I get no options; gain control from 0 to 10.
So I looked in the operator's manual, and it was the same deal.
Mine is just too old, I guess.
2010 Dodge 2500 SLT CCLB 4WD G56 Cummins 6.7 turbo diesel, 3.42 LSD. Add ons: Banks Monster Ram, Grid heater delete, Spyntec Free Spin Kit with Warn hubs (62672) Laramie Alloys (includes spare), "Powerwagon" Flares, Powerwagon bed decal (4X4 off road) OE Ram mudflaps, OE Slush Mats, OE Clearance Lamps, Geno's shift knob in black, 5" DPF back with muffler delete, spray in bedliner, OE brake controller, Durafit Seat Covers, Pro Tech Toolbox, Speed Turtle, Upfitter switches, Ham Radios, 8 Antennas, headache rack, emergency light bar,....
IGOTACUMMINS thanked for this post
Can you do a firmware update?
II 60HP STICKS, II 33% CP3, II S464 2ND GEN SWAP, FASS 165 TITANIUM SIGNATURE SERIES, AFE INTAKE HORN, S&B FILTER, 5" TURBO BACK, ALPHAREX HEAD LIGHTS, 38X13.5X20 RAZOR M/T, MOTO METAL RIMS, 6" LA LIFT KIT, COMPLET MM3 KIT, BUILT TRANSMISSION, 6 BOLT REDHEAD STEERING BOX, YUKON 4.56 GEARS W/ COVERS
IGOTACUMMINS thanked for this post
No, probably a dealer-only deal.
The owner's manual doesn't show it, but an update might.
2010 Dodge 2500 SLT CCLB 4WD G56 Cummins 6.7 turbo diesel, 3.42 LSD. Add ons: Banks Monster Ram, Grid heater delete, Spyntec Free Spin Kit with Warn hubs (62672) Laramie Alloys (includes spare), "Powerwagon" Flares, Powerwagon bed decal (4X4 off road) OE Ram mudflaps, OE Slush Mats, OE Clearance Lamps, Geno's shift knob in black, 5" DPF back with muffler delete, spray in bedliner, OE brake controller, Durafit Seat Covers, Pro Tech Toolbox, Speed Turtle, Upfitter switches, Ham Radios, 8 Antennas, headache rack, emergency light bar,....
IGOTACUMMINS thanked for this post
Posting Permissions
Register To Reply
Bookmarks