I have 2014 deleted RAM 2500 Laramie.

The problem I’m having started when I plugged my block heater in. When I unplugged it, the outside temp would read 120+.

The first time it reset itself back to normal, but the last time it was 140+ until I finally pulled the negative cable. After that, I got the -40.

I’ve replaced the AAT sensor twice.

The first time I cut and soldered, I thought maybe I messed something up, so I bought new mirrors with a new temp sensor.

I am still getting P0073&P0070.

I tested the sensor, and have resistance.

I’m unsure where to find the different pin locations to test the driver-side door module. I also have no idea what to do next.

I’d rather not take it to a dealer and have them milk me for money for something I could have done.

Any help is appreciated; I live in Vancouver, WA


Sent from my iPhone using Tapatalk