Thanks Thanks:  8
Likes Likes:  17
Results 1 to 6 of 6

Thread: Bumper Swap

  1. Top Of Page | #1
    BubbaJo's Avatar

    User Info Menu

    Bumper Swap

    So I was able to finally get my hands on a front bumper with fog light cutouts this weekend.

    My truck didn't come with fog lights, so I'm looking into adding pod lights and then putting them on a switch or two in the cab.

    "New" bumper didn't come with any mounting brackets for fogs or even for the truck.

    Figure I would be able to use the current mounting brackets from my existing bumper.

    What suggestions do you guys have for pod/cube light kits?

    I know rigid makes a kit, but I think it's like $500-$600.

    Are there other options out there?

    I'm looking for one set being amber/yellow and the other set being clear/white.

    Living in Michigan, the yellow comes in handy during snowstorms and rain.

    2012 2500 SLT - 35's, 5% Tint, Custom Katzkin Leather Interior, NOCO Plug adapter for Block Heater, DRD Weight Loss Program, 4" turbo back exhaust, 20" Rough Country Single Row LED Light Bar, EZ-Lift tailgate, 2 Car Seats, cracker crumbs, and 3 year old french fries

  2. Thanks watersupply189, IGOTACUMMINS thanked for this post
    Likes watersupply189, AK Bob, IGOTACUMMINS liked this post
  3. Top Of Page | #2
    MOD watersupply189's Avatar

    User Info Menu

    Re: Bumper Swap

    Check out Diode Dynamics.


    2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

    2016 RAM 3500 4x4 Laramie Crew Cab
    Cummins,G56, Rough Country level, Morimoto LED fog lights, LED headlights, Lund Attitude Steps sprayed with Line-X, DRL's Activated, 35x12.50R18 Falken Wildpeak ATW3, Fuel Vapor Wheels Matte Black w/Dark Tint, A.R.E. Truck cap and swing boxes

  4. Thanks IGOTACUMMINS thanked for this post
    Likes AK Bob, IGOTACUMMINS liked this post
  5. Top Of Page | #3
    BubbaJo's Avatar

    User Info Menu

    Re: Bumper Swap

    I checked them out, but I could only find packages if my truck already came with fogs.

    Unless all of the wirings are already there, and I need it unlocked at the dealer?

    Then I can do a plug-and-play and have it unlocked?

    2012 2500 SLT - 35's, 5% Tint, Custom Katzkin Leather Interior, NOCO Plug adapter for Block Heater, DRD Weight Loss Program, 4" turbo back exhaust, 20" Rough Country Single Row LED Light Bar, EZ-Lift tailgate, 2 Car Seats, cracker crumbs, and 3 year old french fries

  6. Thanks watersupply189, IGOTACUMMINS thanked for this post
    Likes watersupply189, AK Bob, IGOTACUMMINS liked this post
  7. Top Of Page | #4
    Permanent Vacation Chrisn162001's Avatar

    User Info Menu

    Re: Bumper Swap

    Check for the plug on the drive side bottom corner of the bumper.

    If it’s not there, there are two wires to add to one of the fuse box connectors.

    I have the diagram somewhere from when I added fogs to my truck.


    Sent from my iPhone using Tapatalk


  8. Thanks IGOTACUMMINS thanked for this post
    Likes AK Bob, watersupply189, IGOTACUMMINS liked this post
  9. Top Of Page | #5
    Gerald636's Avatar

    User Info Menu

    Re: Bumper Swap

    Rigid square pods.

    A little costly but superior over any on the market.

    I tried cheaper ones at first, water leaked inside one, and a lens turned cloudy within four months.

    I have had rigid on for nearly 2 yrs and not one problem.


    Sent from my iPhone using Tapatalk


  10. Thanks IGOTACUMMINS thanked for this post
  11. Top Of Page | #6
    zrose03's Avatar

    User Info Menu

    Re: Bumper Swap

    Give Baja Designs a look.

    I put a set on my 3rd gen and have no complaints, plus they came with all the wiring and a switch that I just ran to the cab.

    2009 RAM 2500 QC | 68RFE | Revmax HD Valve Body | Revmax Custom TCM | DRD Tuned | Mag-Hytec Trans Pan | 4" Flo~Pro TBE w/30" FTE Resonator | FASS 165 w/Beans Sump | S&B CAI | 3.5" Banks Monster Ram | 18x9 Method NV Wheels | 35" BFG KO2 AT | 3" Thuren Coils | Thuren Fox 2.0 IFP Shocks | Thuren Sway Bar | Carli Track Bar | Carli Ext. Control Arms | Carli Add-A-Pack | EMF Ball Joints

  12. Thanks IGOTACUMMINS thanked for this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •