Thanks Thanks:  7
Likes Likes:  16
Results 1 to 5 of 5

Thread: Which Shocks to Eliminate the Loaded BOUNCE?

  1. Top Of Page | #1
    Let's Go BRANDON!!! Patriot MotorSports's Avatar

    User Info Menu

    Cool Which Shocks to Eliminate the Loaded BOUNCE?

    I have been looking for several weeks to replace the pathetic shocks on my 2021 RAM 3500.

    Unfortunately, all I find are shocks for lifted trucks.

    I want to find a set of remotes with adjustable valving and replaceable fluid, so IF needed, i can change the rates.

    I have lowered the front 1.5" so the truck does not squat when hauling a heavy load, and this has dramatically reduced the bounce leveraged by towing a heavy trailer.

    The photo below of the Zyl Vardos "Moon Dragon" shows the lack of squat with the 2400# tongue load, but the factory shocks need help.

    www.ZylVardos.com

    The more significant issue is when traveling on the North East roads like New York & Jersey, the drivetrain takes a beating as if I were driving on the Moon!!

    I am looking for suggestions!

    Thanks!




  2. Thanks IGOTACUMMINS thanked for this post
    Likes watersupply189, IGOTACUMMINS, AK Bob liked this post
  3. Top Of Page | #2
    badbajawa's Avatar

    User Info Menu

    Re: Which Shocks to Eliminate the Loaded BOUNCE?

    Thuren Fabrication 110%.

    Sent from my SM-N975U using Tapatalk


  4. Thanks Patriot MotorSports, IGOTACUMMINS thanked for this post
  5. Top Of Page | #3
    badbajawa's Avatar

    User Info Menu

    Re: Which Shocks to Eliminate the Loaded BOUNCE?

    Now that I'm able to take a second to give a better reply, here we go.

    Thuren Leafs were the most considerable improvement for the bounce I believe you are talking about, but that's going to push you into airbags and Daystar cradles to support the heavy-end loads. It will take about 2k lbs without but just all-around better to add them.

    You go from the factory five-leaf pack to a full progressive 14 leaf pack that helps prevent the super whiplash feeling.

    It also allows them to tune the shocks very well to the spring.

    Dons leafs provide 1/2" of rear lift, which can be removed with his 1/2" lowering shackles if desired.

    He also offers multiple heights of front coils to keep them as low as desired.

    I have zero regrets about the entire suspension setup because of all the different things I've ever spent money on one of these trucks.

    Sent from my SM-N975U using Tapatalk


  6. Thanks IGOTACUMMINS thanked for this post
    Likes watersupply189, IGOTACUMMINS, AK Bob liked this post
  7. Top Of Page | #4
    Let's Go BRANDON!!! Patriot MotorSports's Avatar

    User Info Menu

    Re: Which Shocks to Eliminate the Loaded BOUNCE?

    Quote Originally Posted by badbajawa View Post
    Thuren fabrication 110%.

    Sent from my SM-N975U using Tapatalk
    Thanks!

    I have spent the last hour reading everything on their website and will be calling tomorrow to place my order and see if, within the 8-10 months wait time, I will still have a front & rear axle attached.


  8. Thanks IGOTACUMMINS thanked for this post
    Likes watersupply189, IGOTACUMMINS, AK Bob liked this post
  9. Top Of Page | #5
    badbajawa's Avatar

    User Info Menu

    Re: Which Shocks to Eliminate the Loaded BOUNCE?

    Good to hear.

    You shouldn't be disappointed other than the wait time on shocks, but not much any supplier can do about that, unfortunately.

    Sent from my SM-N975U using Tapatalk


  10. Thanks Patriot MotorSports, IGOTACUMMINS thanked for this post
    Likes watersupply189, IGOTACUMMINS, AK Bob liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •