Airdog Fitting Size?

[608_cummins]

I am seeing if anyone can help me out.

I have an Airdog II 165 I am looking to put on my 2008 this winter.

I am looking to run a line and some hard lines.

I am seeing what size fittings fit in the Airdog and the CP3?

Thanks.

 0 Comment(s)

[DIESELWRKS]

Not sure what you are asking.

The air dogs come with a complete kit.

Should have all the fittings.

Can you explain more about what you need?

 0 Comment(s)

[608_cummins]

Ok, so the whole situation I have is going on.

I had this lift pump on a previous common rail and used the included fittings in that setup.

Nothing wrong with that style.

I am just not a fan of them.

So I plan to use standard -and fittings to connect to and from the lift pump and at my CP3.

I am also thinking about running a hard line from my lift pump to my CP3.

I am looking to use as little of a rubber line as possible.

I can not remember what size fittings fit in the Airdog lift pump and the CP3.

 0 Comment(s)

[DIESELWRKS]

https://www.google.com/url?sa=t&sour...ASWSxdPK3RUPrU

Install manual has fitting info.

Hope this helps.

 0 Comment(s)

[608_cummins]

Thanks, man.

I forgot the manual had the fitting info.

I will use that and do some digging.

Hopefully, being unf style of threads doesn't make it hard to do.

 0 Comment(s)

[Metal Tech]

I did the same with my Air Dog, using type AN fittings.

I was able to find them online easily.

If you have not found a source, let me know, and I will dig up the place I got mine from.

I upgraded the Teflon AN hose on my 2001 and will do the o same on my 07.5.

Hydraulics Direct | Online Hydraulics Store

I figured I'd just add the source in case someone else is looking for a source.

 0 Comment(s)