I am seeing if anyone can help me out.
I have an Airdog II 165 I am looking to put on my 2008 this winter.
I am looking to run a line and some hard lines.
I am seeing what size fittings fit in the Airdog and the CP3?
Thanks.
I am seeing if anyone can help me out.
I have an Airdog II 165 I am looking to put on my 2008 this winter.
I am looking to run a line and some hard lines.
I am seeing what size fittings fit in the Airdog and the CP3?
Thanks.
Not sure what you are asking.
The air dogs come with a complete kit.
Should have all the fittings.
Can you explain more about what you need?
2017 WON TON CC LB 68AUTO
Secret stuff that make it vroom and whistle better Thuren 2.25 w/2.0 Fox Resi
Justin
Southern Oregon ( the Republican part)
UNITEDSTATES MARINE CORPS 1993-2007
No better friend, No better enemy.
Ok, so the whole situation I have is going on.
I had this lift pump on a previous common rail and used the included fittings in that setup.
Nothing wrong with that style.
I am just not a fan of them.
So I plan to use standard -and fittings to connect to and from the lift pump and at my CP3.
I am also thinking about running a hard line from my lift pump to my CP3.
I am looking to use as little of a rubber line as possible.
I can not remember what size fittings fit in the Airdog lift pump and the CP3.
https://www.google.com/url?sa=t&sour...ASWSxdPK3RUPrU
Install manual has fitting info.
Hope this helps.
2017 WON TON CC LB 68AUTO
Secret stuff that make it vroom and whistle better Thuren 2.25 w/2.0 Fox Resi
Justin
Southern Oregon ( the Republican part)
UNITEDSTATES MARINE CORPS 1993-2007
No better friend, No better enemy.
Thanks, man.
I forgot the manual had the fitting info.
I will use that and do some digging.
Hopefully, being unf style of threads doesn't make it hard to do.
I did the same with my Air Dog, using type AN fittings.
I was able to find them online easily.
If you have not found a source, let me know, and I will dig up the place I got mine from.
I upgraded the Teflon AN hose on my 2001 and will do the o same on my 07.5.
Hydraulics Direct | Online Hydraulics Store
I figured I'd just add the source in case someone else is looking for a source.
Last edited by Metal Tech; 11-28-2021 at 09:11 PM. Reason: part source addition
Bookmarks