Thanks Thanks:  8
Likes Likes:  19
Results 1 to 6 of 6

Thread: Head Scratching After Revmax Valve Body Install

  1. Top Of Page | #1
    Ruby's Avatar

    User Info Menu

    Head Scratching After Revmax Valve Body Install

    Hello Good People!

    So I swapped out my factory valve body with a Revmax this morning.

    After getting everything buttoned up and taking the truck around the block, I got a CEL that wasn't present before I started this task.

    My MM3 is reading codes P0706 and P0750.

    Everything went smooth with the job, and everything fell into place, more or less.

    The truck is shifting just as It did before I replaced the VB.

    Do y'all all have any advice or suggestions before I dump 15 quarts of fresh ATF+4 and change the solenoid out?


  2. Thanks IGOTACUMMINS thanked for this post
  3. Top Of Page | #2
    Ruby's Avatar

    User Info Menu

    Re: Head Scratching After Revmax Valve Body Install

    I went out for some running around this morning, and when I got back into the truck after the grocery store, there was no CEL.


  4. Thanks IGOTACUMMINS thanked for this post
  5. Top Of Page | #3
    I WILL STAND! AK Bob's Avatar

    User Info Menu

    Re: Head Scratching After Revmax Valve Body Install

    Pleased to hear; I guess it just needed the fluid to circulate and a few key cycles.


    2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit and 50 Gallon auxiliary fuel tank.

    Sent from my iPad using Tapatalk

    2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.

  6. Thanks IGOTACUMMINS thanked for this post
    Likes watersupply189, IGOTACUMMINS liked this post
  7. Top Of Page | #4
    TDC's Avatar

    User Info Menu

    Re: Head Scratching After Revmax Valve Body Install

    Glad it’s all better.

    Got to love Revmax.

    White Ram 2500 4x4 Laramie, Tuned, 625 ARPs, Revmax transmission with a billet input shaft, billet flex plate, Revmax thermal bypass, Revmax deep pan, Revmax billet valve body,
    4600 shocks, Airdog 165, ARE shell, Line-X, ICT grid heater delete, Glacier diesel grid heater, stock size tires and wheels, stock suspension, mostly just a stock truck.

  8. Thanks IGOTACUMMINS thanked for this post
    Likes watersupply189, AK Bob, IGOTACUMMINS liked this post
  9. Top Of Page | #5
    6.7 Coal Train's Avatar

    User Info Menu

    Re: Head Scratching After Revmax Valve Body Install

    Did you get new tuning for the VB?

    2017 2500 Laramie: DRD Juiced, 5" TBE, Invisible EGR mod, BD Iron Horn 364sxe/1.0AR, 20x10 Hostile Sprockets, 33x12.50 General Grabber A/T, HID Conversion, Reverse Level 2" Drop CSS Rear Coils

  10. Thanks IGOTACUMMINS thanked for this post
    Likes IGOTACUMMINS, watersupply189 liked this post
  11. Top Of Page | #6
    Ruby's Avatar

    User Info Menu

    Re: Head Scratching After Revmax Valve Body Install

    Sorry it took so long to get back to you on this, my friend.

    Yeah, I had the RR retune done the same day.

    All is well with the truck now.

    Having too much fun!


  12. Thanks AK Bob, TK666, IGOTACUMMINS thanked for this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •