Thanks Thanks:  0
Likes Likes:  0
Results 1 to 1 of 1

Thread: Tuning Help On A RaceME Ultra

  1. Top Of Page | #1
    Cody Adams's Avatar

    User Info Menu

    Tuning Help On A RaceME Ultra

    It may need some custom tuning.

    As I believe I'm running out of fuel, which is what questions me.

    The issue I’m having is with the 08 gold 6.7L, and both trucks are on RaceME Ultras.

    200k mile 2008 6.7L 68RFE, Airdog 165, banks intercooler, and +size pipes.

    Running on the 200hp tune without timing, rail at default, timing set to stock, VGT default, torque default.

    120k mile 2013 6.7 68RFE, Airdog 165, 62mm turbo, running the same 200hp tune with default timing (Everything default).

    Now the 2013 smokes like a chimney when wot, but the truck is NOT slow.

    I know they say poor tunes create smoke, but we are on the same tuner on the same tune file.

    2008 will not smoke at all.

    I just did the lift pump on it because I figured the factory pump at 200k miles had put but changing out with air dog did nothing.

    So my thing is I’m starting to worry if I’m not feeling enough.

    I’m able to monitor injector balance rates with the 08 Ecu, and they do jump around over 7% sometimes.

    Can bad injectors cause the truck not to smoke?

    Should I be looking at the CP3?

    2008 makes 27k rail without dropping below 23.

    The boost around 36lbs truck moves, just not even a puff of smoke.

    Someone on here I can send a log file to check the truck out thru wot?

    Now I’m all cool if it’s just dialed in. I just want to make sure it’s right, is I got two trucks here almost identical on the same tunes, and the 13 smokes when on it heavy top rpm and 2008 6.7, I got nothing but speed LOL.

    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •