Not sure if I'm posting this in the right forum. I have a 99 Dodge and I need new headlight assemblies should I go with factory style or aftermarket?
Not sure if I'm posting this in the right forum. I have a 99 Dodge and I need new headlight assemblies should I go with factory style or aftermarket?
for looks anzo projectors
for looks and light out put anzo Chrystal light housings with PIAA bulbs or to get on everyones nerves add HID kits
Thanks I'm mostly looking for output my headlights are fogged over pretty bad and I can't see very good at night when it's raining
Our one moderator on here does a banging job with head lights!
Oh Rob!
I really need to do a write up about this. I do it so often for people
If you have a polisher that's a big + and quickens the job
Get some rubbing compound and a piece of 1500 wet sand paper. A decent hardware store will usually have both. I'm talking like a true value. Not a Home Cheapo.
Thoroughly wet sand the head lights with the 1500. Keep rinsing to check the progress. When the oxidized plastic is gone, then compound the head light with the rubbing compound until crystal clear. Follow the directions on the can. A follow up with a good wax is a good idea, but not necessary.
May cost about 8 bucks to do both headlights. You'll need to put some effort into the compounding, but it should take about 20 minutes per side.
2003- 3500 RWD Automatic. S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95, 50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC
Do it Steve.
Bring me a set of headlights that need to be done. I already did Alex's
2003- 3500 RWD Automatic. S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95, 50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC
I'm sure we can find someone's on here.
Thanks for the info guys I appreciate it!
Bookmarks