Is anyone able to run 37s on a puck-style leveling kit?
I've got a 2011 with 17s and 0 offset with 4.5 in of backspacing.
Is anyone able to run 37s on a puck-style leveling kit?
I've got a 2011 with 17s and 0 offset with 4.5 in of backspacing.
Let's ask @Custom Offsets as they would know, friend.
God bless,
igotacummins
It would depend on the size of puck style leveling kit.
It also depends on what width 37's you are running.
Most of the time, your best bet is to go with a Thuren or Carli type leveling kit with an adjustable track bar to not only level it properly but to give you the clearance you would need.
Feel free to give us a shout if you need any assistance!
Clayton
Matthew 6:9-13, 2 Corinthians 5:20
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email us at:
sales@ddpmotorsports.com
www.ddpmotorsports.com
37’s on 0 offset wheels will be tight and maybe into the sheet metal with leveling.
37’s will fit the stock to 4” with the right offset wheel of +18 to +27 and some plastic trimming.
Additional details here: https://thurenfabrication.com/pages/tire-wheel-fitment
2018 srw 3500
I’m running 3 inche Carli on 37-13.5-17 on zero offset methods.
I had to trim the pinch weld and the plastic fender liner.
You can probably run 37s 12.5 on a 2.5-inch level with the same amount of trimming.
Sent from my iPhone using Tapatalk
Bookmarks