Thanks: 4
Likes: 20
I have 195k on it.
Put the kit on at 182k haven't had 1 issue.
And I am running DRD tuning on an MM3 controller.
4-inch downpipe and S400 kit and tune, and that are pretty much it. And ARP head studs and exhaust manifold bolts
When I get on load, it is randomly making a whining noise.
Could this be the tranny on the way out or a boost leak from the Intercooler pipe to the intake manifold pipe?
Those are stock clamps and hoses
20210411_174823.jpg
20210411_174830.jpg
Have you checked your delete plates to make sure they are tight and sealing good?
Sent from my iPhone using Tapatalk
2016 RAM 3500 4x4 Laramie Crew Cab ,G56
Also, check if you still have the stock intercooler and a boost leak or a crack in it.
Sent from my SM-G981W using Tapatalk
No I am doing that this morning. I am starting to think it is a exhaust leak
I have stock intercooler.
I'm checking all this today.
I have seen the back EGR plate come loose and start to whistle.
Sent from my SM-G981W using Tapatalk
Easy way to check for exhaust leaks!Originally Posted by 2018cummings
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit and 50 Gallon auxiliary fuel tank.
Sent from my iPad using Tapatalk
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.
watersupply189 liked this post
It was my exhaust manifold.
On the 6th cylinder the bolts onto the stud fell off.
All being fixed as we speak and a fleece exhaust brake being installed.
Posting Permissions
Register To Reply
Bookmarks