Thanks Thanks:  0
Likes Likes:  5
Results 1 to 2 of 2

Thread: Help Me To Identify What This Is

  1. Top Of Page | #1
    BigHips2017's Avatar

    User Info Menu

    Help Me To Identify What This Is

    2017 6.7L Cummins.

    What is the 6-inch hard metal line that screws into the exhaust manifold center and goes vertical to a sensor with a heat wrap around the sensor?

    Possibly Exhaust Back Pressure sensor.

    Do I remove or reuse this sensor?

    Thanks for this great forum.


  2. Likes watersupply189, AK Bob liked this post
  3. Top Of Page | #2
    Compton's Avatar

    User Info Menu

    Re: Help Me To Identify What This Is

    Yes, sir, it's the exhaust backpressure.

    It's for the truck computer.

    What are you trying to do?

    If your adding a gauge, I've seen where ppl tie into the wires on the stock back pressure sensor.

    2018 Ram 2500 Big Horn / 4x4 / CC / 68RFE / 20" Fuel Triton wheels / Toyo RT 37"s / 5" Rough Country Lift / 5" Straight / Studded / CCV Gutted (Reroute) / S&B CAI / Airdog 165 4g II / G&R Sump / Isspro Fuel Pressure gauge (Lift pump) / Isspro Pyrometer / Pacbrake Oil Filter Re-Location / Amp'd Throttle Booster / Raceme Ultra Drd Tunes / Airlift 7500 Bags / B&W Turn Over Ball

  4. Likes watersupply189, AK Bob, timshooter40 liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •