Thanks Thanks:  8
Likes Likes:  28
Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: WTB: Wheels/Tires

  1. Top Of Page | #1
    Badger2078's Avatar

    User Info Menu

    WTB: Wheels/Tires

    I need a quote.

    I'm looking to buy a set of 4 wheels.

    I've pretty much decided on fuel vapor wheels with machined spoke faces (are these spoke faces tinted?) 18 inches.

    I'm not sure about the offset and will request guidance on this front.

    I'm not sure of the factory wheel offset (chrome-clad/steel/18"), so I'm not sure of the offset i want to go with.

    I want the wheel and tire to protrude more than the factory set up by a couple of inches but nothing excessive (I will not use wheel spacers (ever)).

    I also need two of the wheels mounted and balanced with 2 Nitto terra grappler G2 (325/60/r18) load range E.

    I only need two tires as I have 2 already mounted on the factory wheels that still have 90% life left.

    I've been putting this off for too long, and the wife, believe it or not, has been nagging me daily about ordering them (a good problem to have, right?), so id like to get it done asap.

    Thanks

    2016 2500 ram Cummins G56 4x4


  2. Likes watersupply189, AK Bob liked this post
  3. Top Of Page | #2
    I WILL STAND! AK Bob's Avatar

    User Info Menu

    Re: wtb-wheels/tires

    @Custom Offsets


    2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit and 50 Gallon auxiliary fuel tank.

    Sent from my iPhone using Tapatalk

    2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.

  4. Thanks Badger2078 thanked for this post
    Likes Badger2078, watersupply189 liked this post
  5. Top Of Page | #3
    No Vacancy Power247's Avatar

    User Info Menu

    Re: WTB: Wheels/Tires

    Quote Originally Posted by Badger2078 View Post
    I need a quote.

    I'm looking to buy a set of 4 wheels.

    I've pretty much decided on fuel vapor wheels with machined spoke faces (are these spoke faces tinted?) 18 inches.

    I'm not sure about the offset and will request guidance on this front.

    I'm not sure of the factory wheel offset (chrome-clad/steel/18"), so I'm not sure of the offset i want to go with.

    I want the wheel and tire to protrude more than the factory set up by a couple of inches but nothing excessive (I will not use wheel spacers (ever)).

    I also need two of the wheels mounted and balanced with 2 Nitto terra grappler G2 (325/60/r18) load range E.

    I only need two tires as I have 2 already mounted on the factory wheels that still have 90% life left.

    I've been putting this off for too long, and the wife, believe it or not, has been nagging me daily about ordering them (a good problem to have, right?), so id like to get it done asap.

    Thanks

    2016 2500 ram Cummins G56 4x4
    Not a quote but wanted to share some info on rim sizing that may help you decide what size is right for you.

    Most factory rims are 8" wide and between +48 and +56 offset depending on style and diameter.

    I had Fuel Hostage on my '12 that was 9" wide and +20 offset.

    They stuck out just past the wheel wells and would have been even with factory flares if I had them.

    The closer you get to 0 and into the negatives the further the wheel will stick out.

    I hope this helps.





    Greg
    2019 | RAM 2500 | CCSB | 6.4 HEMI
    2016 | Heartland Pioneer | DS310

    Greg
    2019 | RAM 2500 | CCSB | 6.4 HEMI

  6. Thanks Badger2078 thanked for this post
  7. Top Of Page | #4
    Badger2078's Avatar

    User Info Menu

    Re: WTB: Wheels/Tires

    Quote Originally Posted by Power247 View Post
    Not a quote but wanted to share some info on rim sizing that may help you decide what size is right for you.

    Most factory rims are 8" wide and between +48 and +56 offset depending on style and diameter.

    I had Fuel Hostage on my '12 that was 9" wide and +20 offset.

    They stuck out just past the wheel wells and would have been even with factory flares if I had them.

    The closer you get to 0 and into the negatives the further the wheel will stick out.

    I hope this helps.

    https://uploads.tapatalk-cdn.com/202...7a6e45fef1.jpg

    https://uploads.tapatalk-cdn.com/202...53bf7fd938.jpg

    Greg
    2019 | RAM 2500 | CCSB | 6.4 HEMI
    2016 | Heartland Pioneer | DS310
    That is very helpful.

    I would like to see about 1 inch more stick out than that given whatever offset is available.

    Anyone know if they monitor these forums?

    Sent from my SM-G973U using Tapatalk


  8. Likes watersupply189, AK Bob, Power247 liked this post
  9. Top Of Page | #5
    MOD watersupply189's Avatar

    User Info Menu

    Re: WTB: Wheels/Tires


    I have the fuel vapor wheels at -12 offset. Tires are 35x12.50


    2016 Ram 3500 CC 4x4, G56

    2016 RAM 3500 4x4 Laramie Crew Cab ,G56

  10. Thanks Badger2078 thanked for this post
    Likes AK Bob, Badger2078, Power247 liked this post
  11. Top Of Page | #6
    I WILL STAND! AK Bob's Avatar

    User Info Menu

    Re: WTB: Wheels/Tires

    Quote Originally Posted by Badger2078 View Post
    That is very helpful.

    I would like to see about 1 inch more stick out than that given whatever offset is available.

    Anyone know if they monitor these forums?

    Sent from my SM-G973U using Tapatalk
    Not sure if they do, but you can go to their website or PM them.


    2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit and 50 Gallon auxiliary fuel tank.

    Sent from my iPad using Tapatalk

    2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.

  12. Thanks Badger2078 thanked for this post
    Likes Badger2078, watersupply189 liked this post
  13. Top Of Page | #7
    Badger2078's Avatar

    User Info Menu

    Re: WTB: Wheels/Tires

    Quote Originally Posted by watersupply189 View Post
    https://uploads.tapatalk-cdn.com/202...6c9a901932.jpg
    I have the fuel vapor wheels at -12 offset. Tires are 35x12.50


    2016 Ram 3500 CC 4x4, G56
    Thanks brother that looks perfect.

    Sent from my SM-G973U using Tapatalk


  14. Thanks watersupply189 thanked for this post
    Likes AK Bob, watersupply189 liked this post
  15. Top Of Page | #8
    TH-64's Avatar

    User Info Menu

    Re: WTB: Wheels/Tires

    Quote Originally Posted by watersupply189 View Post
    https://uploads.tapatalk-cdn.com/202...6c9a901932.jpg
    I have the fuel vapor wheels at -12 offset. Tires are 35x12.50


    2016 Ram 3500 CC 4x4, G56
    Love the mud flaps.

    What brand?

    Sent from my SM-G950U using Tapatalk

    2012 CCSB Saddle Brown Pearl... DRD tuned

  16. Thanks watersupply189 thanked for this post
    Likes watersupply189, AK Bob liked this post
  17. Top Of Page | #9
    MOD watersupply189's Avatar

    User Info Menu

    Re: WTB: Wheels/Tires

    Quote Originally Posted by TH-64 View Post
    Love the mud flaps.

    What brand?

    Sent from my SM-G950U using Tapatalk
    Bullet Proof is the brand name.


    2016 Ram 3500 CC 4x4, G56

    2016 RAM 3500 4x4 Laramie Crew Cab ,G56

  18. Likes AK Bob liked this post
  19. Top Of Page | #10
    MOD watersupply189's Avatar

    User Info Menu

    Re: WTB: Wheels/Tires

    Quote Originally Posted by Badger2078 View Post
    Thanks brother that looks perfect.

    Sent from my SM-G973U using Tapatalk
    Not a problem brother.

    This was the exact look I was looking for when I bought my wheels and tires.


    2016 Ram 3500 CC 4x4, G56

    2016 RAM 3500 4x4 Laramie Crew Cab ,G56

  20. Thanks Badger2078 thanked for this post
    Likes AK Bob, Badger2078, Power247 liked this post
Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •