Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: 364.5SXE With Waste Gated .83 Exhaust Housing?

  1. Top Of Page | #1
    Cummins-'s Avatar

    User Info Menu

    364.5SXE With Waste Gated .83 Exhaust Housing?

    I am currently running BDs Rumble B 2nd Gen Swap.

    Turbo is the 364.5 80 with 91 AR works great at sea level but falls flat over 6k feet.

    I’m running 50hp injectors from industrial.

    My question is has anyone ran this turbo with a waste gated .83 AR T-4 exhaust housing.

    I know they make it, just wondering what my EGT's would be with my injectors.


  2. Top Of Page | #2
    #1 VENDOR cumminsdieselfreak's Avatar

    User Info Menu

    Re: 364.5SXE With Waste Gated .83 Exhaust Housing?

    Quote Originally Posted by Cummins- View Post
    I am currently running BDs Rumble B 2nd Gen Swap.

    Turbo is the 364.5 80 with 91 AR works great at sea level but falls flat over 6k feet.

    I’m running 50hp injectors from industrial.

    My question is has anyone ran this turbo with a waste gated .83 AR T-4 exhaust housing.

    I know they make it, just wondering what my EGT's would be with my injectors.
    A 364/.91 should perform very good at only 6k ft. I'd personally never run a .83 on a 6.7

    2018 Ram 2500 4x4 G56
    Romans 10:13

    See what we are up to on:
    FACEBOOK | INSTAGRAM
    Or Email me at:
    joe@ddpmotorsports.com
    www.ddpmotorsports.com


  3. Top Of Page | #3
    Cummins-'s Avatar

    User Info Menu

    Re: 364.5SXE With Waste Gated .83 Exhaust Housing?

    I was shocked as well.

    I went to flagstaff at 6800ft and if I gave it too much pedal the truck would fall on its face.

    If the rpms where up it was no big problem.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •