I just cant wait till this shows up.
I just cant wait till this shows up.
diggerdave's rig...name bluedemon 2 2008 6.7 cummins
-bilstein 5100's all 5 shocks-fully deleted-greg weld ballistic rims w/35" nitto trail grappler shoes-7" canon stacks miters-H&S tuned -afe cai-iron cross front and rear bumper-buncha bd diesel parts
I'm gonna paint it Metallic blue.
diggerdave's rig...name bluedemon 2 2008 6.7 cummins
-bilstein 5100's all 5 shocks-fully deleted-greg weld ballistic rims w/35" nitto trail grappler shoes-7" canon stacks miters-H&S tuned -afe cai-iron cross front and rear bumper-buncha bd diesel parts
I was looking at these on eBay.
I want one, I was curious what the purpose of the dent is on one of the intake runners?
Sent from my SM-N981U using Tapatalk
I'll bet its the photo and lighting, and there's no dent.
Jim
2006 ~ 2500HD, Big Horn Edition, 5.9, 4x4, Q/Cab, 48RE, L/B, 3.73, S&B CAI & Snout, ProFlo 5" S/S exhaust, Smarty Touch, Oil ByPass Kit, 60 gal main tank, 110 gallon in-bed tank, XX-Fuel Filter System, Coolant Bypass Kit, Mag-Hytec front & rear end covers and trans pan, 285 x 70 x 17
"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children’s children what it was once like in the United States, where men 'were' free." ~ Ronald Regan
It is for inj line clearance.
thats where i got it from egay ...LOL .....price was right and with a good coat of paint shes gonna look good ,,i figured id try it out for the price was great UOTE=Tylerhrules;208487]I was looking at these on eBay.
I want one, I was curious what the purpose of the dent is on one of the intake runners?
Sent from my SM-N981U using Tapatalk[/QUOTE]
diggerdave's rig...name bluedemon 2 2008 6.7 cummins
-bilstein 5100's all 5 shocks-fully deleted-greg weld ballistic rims w/35" nitto trail grappler shoes-7" canon stacks miters-H&S tuned -afe cai-iron cross front and rear bumper-buncha bd diesel parts
That's where I got mine from.
Check the fitment before you paint it.
I had to adjust the dent some for mine to fit.
I also have a grid heater delete plate that makes it sit higher.
Sent from my SM-N950U using Tapatalk
there we go ..same one ..and i wont be doing the grid heater delete as im in the -40c in winter here in alberta so should fit perfect ,,as i no the dh delete plates are thicker then stock ...one question though ,,,did you need to get new bolts for the flange as i no 1 or 2 of them are longer ?
diggerdave's rig...name bluedemon 2 2008 6.7 cummins
-bilstein 5100's all 5 shocks-fully deleted-greg weld ballistic rims w/35" nitto trail grappler shoes-7" canon stacks miters-H&S tuned -afe cai-iron cross front and rear bumper-buncha bd diesel parts
and did your ic boot fit direct or did ya need to get a new boot ?
diggerdave's rig...name bluedemon 2 2008 6.7 cummins
-bilstein 5100's all 5 shocks-fully deleted-greg weld ballistic rims w/35" nitto trail grappler shoes-7" canon stacks miters-H&S tuned -afe cai-iron cross front and rear bumper-buncha bd diesel parts
Sweet, Im considering the grid heater delete.but I think for my stock to moderate power goals it would be unnecessary
Sent from my SM-N981U using Tapatalk
Bookmarks