Hello,
Is there a way to monitor EGT without installing an aftermarket probe?
I notice there are a couple of Probes at the turbo and on the downpipe.
I remember my 2014 Ford Tuners had access to the Stock probes?
Hello,
Is there a way to monitor EGT without installing an aftermarket probe?
I notice there are a couple of Probes at the turbo and on the downpipe.
I remember my 2014 Ford Tuners had access to the Stock probes?
I was wondering this same thing.
Sent from my iPhone using Tapatalk
No.
2017 2500 Laramie: DRD Juiced, 5" TBE, Invisible EGR mod, BD Iron Horn 364sxe/1.0AR, 20x10 Hostile Sprockets, 33x12.50 General Grabber A/T, HID Conversion, Reverse Level 2" Drop CSS Rear Coils
Unfortunately the stock exhaust temperature probes are after the turbo and too far away to provide any useful timely information about the true EGT.
Ideally the probe needs to be in the exhaust manifold at the “Y” before the turbo.
The rear block off plate is an easier install and is sufficiently accurate when the engine is under load.
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit and 50 Gallon auxiliary fuel tank.
Sent from my iPad using Tapatalk
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.
No, you'll need an aftermarket gauge with a probe.
The Autometer 4th Gen match looks amazing.
If you have an MM3 there is an add-on probe as well, PM me if you have any questions or would like to order one.
2018 Ram 2500 4x4 G56
Romans 10:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
joe@ddpmotorsports.com
www.ddpmotorsports.com
I run an EDGE monitor with the EGT EAS kit.
2018 Ram 3500 slt 6.7 fixed and tuned ARP head studs 68RFE trans REVMAX valve body 4:10 rear axle. barn hauling machine.
How do you like the edge ? I’m looking at getting one and I’m wondering what else I’ll be able to monitor
Sent from my iPhone using Tapatalk
I really like the EDGE.
I run a CTS2.
It has a whole list of thing that you can monitor.
It also has maintenance manager.
2018 Ram 3500 slt 6.7 fixed and tuned ARP head studs 68RFE trans REVMAX valve body 4:10 rear axle. barn hauling machine.
Bookmarks