Thanks Thanks:  0
Likes Likes:  22
Results 1 to 10 of 10

Thread: Problems With Revmax Product Install

  1. Top Of Page | #1
    bebop86's Avatar

    User Info Menu

    Problems With Revmax Product Install

    I have a 2015 with 60K on it which ran perfectly.

    Just had it into he shop to have the @RevMax valve body, torque converter and bypass added.

    Shop said it will not shift out of 4th- tried a new solenoid but still nothing.

    Revmax said I need new tranny- BUT never ever had a problem with any gear or slipping before I brought it in for the upgrades.

    How do I handle this?


  2. Likes AK Bob, watersupply189, timshooter40 liked this post
  3. Top Of Page | #2
    Permanent Vacation Chrisn162001's Avatar

    User Info Menu

    Re: Problems With Revmax Product Install

    What was the reason for the upgrades?

    What codes do you have?


    Sent from my iPhone using Tapatalk


  4. Likes AK Bob, watersupply189, timshooter40 liked this post
  5. Top Of Page | #3
    bebop86's Avatar

    User Info Menu

    Re: Problems With Revmax Product Install

    I did the upgrades to bullet proof the trans.

    It had zero problems before.

    The codes where P0933, P0935, P0734.

    They said when they replace the solenoid the codes went away but still wont go past 4th gear.


  6. Likes AK Bob, watersupply189, timshooter40 liked this post
  7. Top Of Page | #4
    #1 VENDOR cumminsdieselfreak's Avatar

    User Info Menu

    Re: Problems With Revmax Product Install

    Quote Originally Posted by bebop86 View Post
    I have a 2015 with 60K on it which ran perfectly.

    Just had it into he shop to have the @RevMax valve body, torque converter and bypass added.

    Shop said it will not shift out of 4th- tried a new solenoid but still nothing.

    Revmax said I need new tranny- BUT never ever had a problem with any gear or slipping before I brought it in for the upgrades.

    How do I handle this?
    Where did you get the new solenoid pack from?

    2018 Ram 2500 4x4 G56
    Romans 10:13

    See what we are up to on:
    FACEBOOK | INSTAGRAM
    Or Email me at:
    joe@ddpmotorsports.com
    www.ddpmotorsports.com


  8. Likes AK Bob, watersupply189, timshooter40 liked this post
  9. Top Of Page | #5
    bebop86's Avatar

    User Info Menu

    Re: Problems With Revmax Product Install

    They got it from a Dodge Dealer.


  10. Likes AK Bob, watersupply189, timshooter40 liked this post
  11. Top Of Page | #6
    #1 VENDOR cumminsdieselfreak's Avatar

    User Info Menu

    Re: Problems With Revmax Product Install

    Quote Originally Posted by bebop86 View Post
    They got it from a Dodge Dealer.
    Did they check the line pressure switch on the trans?

    If I had to guess it's the line pressure switch or a wire that was compromised during install or from normal wear.

    2018 Ram 2500 4x4 G56
    Romans 10:13

    See what we are up to on:
    FACEBOOK | INSTAGRAM
    Or Email me at:
    joe@ddpmotorsports.com
    www.ddpmotorsports.com


  12. Likes AK Bob, watersupply189, timshooter40 liked this post
  13. Top Of Page | #7
    Permanent Vacation Chrisn162001's Avatar

    User Info Menu

    Problems With Revmax Product Install

    If you clear codes and drive it gently will it try to go into 5th gear a few times before locking out or does just not go any higher than 4th with out trying to shift into 5th at all?

    The two codes for the pressure sensor performance range and circuit low are likely due to what ever is causing 4th gear issue.


    Sent from my iPhone using Tapatalk


  14. Likes AK Bob, watersupply189, timshooter40 liked this post
  15. Top Of Page | #8
    bebop86's Avatar

    User Info Menu

    Re: Problems With Revmax Product Install


  16. Top Of Page | #9
    bebop86's Avatar

    User Info Menu

    Re: Problems With Revmax Product Install

    So does it look like my clutch is bad?

    Thanks.


  17. Top Of Page | #10
    Permanent Vacation Chrisn162001's Avatar

    User Info Menu

    Re: Problems With Revmax Product Install

    Yeah I’d say it’s slipping based on the CVI.


    Sent from my iPhone using Tapatalk


  18. Likes watersupply189 liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •