Thanks Thanks:  0
Likes Likes:  17
Results 1 to 7 of 7

Thread: 911 Help CP3 Swap

  1. Top Of Page | #1
    Cummins7's Avatar

    User Info Menu

    911 Help CP3 Swap

    Has anyone completed a CP3 swap?

    I can't seem to get my pump aligned to the mounting holes.

    I have a 2020 HO and it's an industrial injection kit.

    Sent from my SM-N986U using Tapatalk


  2. Likes watersupply189, AK Bob, timshooter40 liked this post
  3. Top Of Page | #2
    Houston HB's Avatar

    User Info Menu

    Re: 911 Help CP3 Swap

    Quote Originally Posted by Cummins7 View Post
    Has anyone completed a CP3 swap?

    I can't seem to get my pump aligned to the mounting holes.

    I have a 2020 HO and it's an industrial injection kit.

    Sent from my SM-N986U using Tapatalk
    I did do the swap with SS CP3. It was kinda hard trying to line the gears up, I went in at a angled approached and then I put the lower bolt in loosely to give me room to thread the other 2 in. I did have to use a mirror to line the holes up but my truck is lifted so it kinda hard working on it.


  4. Likes watersupply189, AK Bob, timshooter40 liked this post
  5. Top Of Page | #3
    Cummins7's Avatar

    User Info Menu

    Re: 911 Help CP3 Swap

    Quote Originally Posted by Houston HB View Post
    I did do the swap with SS CP3. It was kinda hard trying to line the gears up, I went in at a angled approached and then I put the lower bolt in loosely to give me room to thread the other 2 in. I did have to use a mirror to line the holes up but my truck is lifted so it kinda hard working on it.
    Thanks for replying! Did you just rotate the pump shaft till it meshed?

    Sent from my SM-N986U using Tapatalk


  6. Likes watersupply189, AK Bob, timshooter40 liked this post
  7. Top Of Page | #4
    ram19's Avatar

    User Info Menu

    Re: 911 Help CP3 Swap

    I did the CP3 Swap. I used SS CP3. It mounted up with no issue. My biggest call out is the bolt for the CP3 next to the block is hard to get to.


  8. Likes watersupply189, AK Bob, timshooter40 liked this post
  9. Top Of Page | #5
    Mimic's Avatar

    User Info Menu

    Re: 911 Help CP3 Swap

    Eddie’s life has a video of the swap on his 2019 mega cab.


  10. Likes watersupply189, AK Bob, timshooter40 liked this post
  11. Top Of Page | #6
    Houston HB's Avatar

    User Info Menu

    Re: 911 Help CP3 Swap

    Quote Originally Posted by ram19 View Post
    I did the CP3 Swap. I used SS CP3. It mounted up with no issue. My biggest call out is the bolt for the CP3 next to the block is hard to get to.
    Jesus yes it was.


  12. Likes AK Bob liked this post
  13. Top Of Page | #7
    Houston HB's Avatar

    User Info Menu

    Re: 911 Help CP3 Swap

    Quote Originally Posted by Cummins7 View Post
    Thanks for replying! Did you just rotate the pump shaft till it meshed?

    Sent from my SM-N986U using Tapatalk
    I turn the shaft one tooth by turn until it mated up.


  14. Likes AK Bob liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •