Has anyone completed a CP3 swap?
I can't seem to get my pump aligned to the mounting holes.
I have a 2020 HO and it's an industrial injection kit.
Sent from my SM-N986U using Tapatalk
Has anyone completed a CP3 swap?
I can't seem to get my pump aligned to the mounting holes.
I have a 2020 HO and it's an industrial injection kit.
Sent from my SM-N986U using Tapatalk
I did do the swap with SS CP3. It was kinda hard trying to line the gears up, I went in at a angled approached and then I put the lower bolt in loosely to give me room to thread the other 2 in. I did have to use a mirror to line the holes up but my truck is lifted so it kinda hard working on it.
Thanks for replying! Did you just rotate the pump shaft till it meshed?
Sent from my SM-N986U using Tapatalk
I did the CP3 Swap. I used SS CP3. It mounted up with no issue. My biggest call out is the bolt for the CP3 next to the block is hard to get to.
Eddie’s life has a video of the swap on his 2019 mega cab.
Jesus yes it was.
I turn the shaft one tooth by turn until it mated up.
Bookmarks