Thanks Thanks:  4
Likes Likes:  9
Results 1 to 3 of 3

Thread: FS: OEM Injectors With DDP 90HP Nozzles

  1. Top Of Page | #1
    Bpbertolacini's Avatar

    User Info Menu

    FS: OEM Injectors With DDP 90HP Nozzles

    Hey folks, I'm tossing around the idea of selling my injectors for some BBI ones.

    Mine are OEM from a 2016 2500 with 76,000 miles on them, and I sent them out for a nozzle swap at 71000 miles.

    I have the flowsheet and were calibrated and inspected when I had the nozzles installed.

    If I can sell them I will move forward with buying the BBI ones.

    All I want for them is what the core charge will cost me, which is 900 bucks.

    They run perfectly fine, do not haze on my setup.

    At least I have a 63mm SXE and an W475 setup, but these are good for anyone with a second-gen swap looking for more fuel.

    Please let me know thanks.

    They're still in the truck, and I still drive it, so if u want a clip of a start or idle, please pm me so I can get your number to send a video.

    16 cummins Laramie longhorn, ccsb, 33,11.5x20 tis wheels,fully deleted, pusher add a turbo kit, 63mm VGT delete turbo,manton springs, manton valve bridges,manton pushrods,steedspeed t4i manifold , 90hp nozzels thuren rear trackball, kingspeed billet valve cover, revmax valve body billet plate, CCV reroute, pusher intake horn, thuren 2in level with king 2.5 front and rear, sway bar kit ,track bar and king steering damper. Air bags from airlift. 4" exhaust, fass lift pump,MM3,DRD tunes.pusher coolant reroute.

  2. Top Of Page | #2

    Re: FS: OEM Injectors With DDP 90HP Nozzles

    Are you wanting $900 plus stock injectors to send in?

    Or just the $900?

    Who did the nozzle swap?

    How was the calibration? like + or - 5%?


  3. Likes AK Bob, watersupply189 liked this post
  4. Top Of Page | #3
    Bpbertolacini's Avatar

    User Info Menu

    Re: FS: OEM Injectors With DDP 90HP Nozzles

    Attachment 12458

    Just the $900 is all I want.

    Dynomite diesel performance did the whole setup.

    Attached Images Attached Images
    16 cummins Laramie longhorn, ccsb, 33,11.5x20 tis wheels,fully deleted, pusher add a turbo kit, 63mm VGT delete turbo,manton springs, manton valve bridges,manton pushrods,steedspeed t4i manifold , 90hp nozzels thuren rear trackball, kingspeed billet valve cover, revmax valve body billet plate, CCV reroute, pusher intake horn, thuren 2in level with king 2.5 front and rear, sway bar kit ,track bar and king steering damper. Air bags from airlift. 4" exhaust, fass lift pump,MM3,DRD tunes.pusher coolant reroute.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •