I'm closing in on pulling the trigger for the MM3 tuner and FLO~PRO exhaust, but I was wondering if I did an intake horn and cold air intake later would I need to have the tuner refreshed?
I'm closing in on pulling the trigger for the MM3 tuner and FLO~PRO exhaust, but I was wondering if I did an intake horn and cold air intake later would I need to have the tuner refreshed?
Nope they will work just fine.
Sent from my SM-G981W using Tapatalk
I don’t think that’s needed but ask Ray at DRD.
2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
No, but If you have a 2013+ and install a intake horn are going to remove your grid heater?
If you live in a colder climate and plan on running without the heater you may want to let Ray know as he can turn off the grid heater code (P2609) on your initial tune.
If you don’t turn this code off and you start your truck without a grid heater in near freezing temperatures with the remote start or with the key and allow the preheat cycle to run you run the risk of initiating a check engine light and P2609 code.
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit and 50 Gallon auxiliary fuel tank.
Sent from my iPad using Tapatalk
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.
I have a 2012, and live in South Carolina.
I dont think it gets to cold to remove the grid heater.
That will be a later project.
Thanks for the advice.
Hey all, I need to retune my truck due to the CP3 recall being done already have my MM3.
There's an option to have the SD card mailed or the tune file emailed.
Can I hook up the MM3 and install the file on the existing card if I have it emailed?
You will need to remove the SD card from the MM3, then copy and paste the new tune file onto the SD card using a Windows PC.
Ensure the new tune file replaces the old one in the same directory on the SD card.
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.
Gotcha, I see; my laptop has an SD insert.
Guess I'll just send it.
Thank you for the fast reply!
Make sure it’s a Windows PC and not a Mac.
2016 Ram Laramie 3500, G56, 6.7, CC, 4x4
2016 RAM 3500 4x4 Laramie Crew Cab ,G56
Bookmarks