Not Getting Fuel

[Shane09]

Will throwing my stock one on be okay to see if that’s the issue

 0 Comment(s)

[Houston HB]

Yea I was wanting one and I went a lil cheaper and this is what happened ??*??

no trust me about going cheap and trying to save some money. Everytime ive done this its always fkd me literally waste more time chasing down gremlins than working. When it comes to big stuff I just bite the bullet and buy the good stuff that cost $$$. I really started to live my life by this following quote, it stings but its so true....

Benjamin Franklin — 'The bitterness of poor quality remains long after the sweetness of low price is forgotten.'

I would also call Clayton at DDP and get the SS CP3 unit and be done. I did mine in one day, pretty straight forward and everything went in perfect.

 0 Comment(s)

[Shane09]

no trust me about going cheap and trying to save some money. Everytime ive done this its always fkd me literally waste more time chasing down gremlins than working. When it comes to big stuff I just bite the bullet and buy the good stuff that cost $$$. I really started to live my life by this following quote, it stings but its so true....

Benjamin Franklin — 'The bitterness of poor quality remains long after the sweetness of low price is forgotten.'

I would also call Clayton at DDP and get the SS CP3 unit and be done. I did mine in one day, pretty straight forward and everything went in perfect.

Well now I got a stock CP3 and another from II and they are non returnable so I guess I threw money down the drain unless warranty fixes it

 0 Comment(s)

[Houston HB]

Well now I got a stock CP3 and another from II and they are non returnable so I guess I threw money down the drain unless warranty fixes it

when you put the stock on did it fix the problem and are you now getting fuel?

 0 Comment(s)

[Shane09]

when you put the stock on did it fix the problem and are you now getting fuel?

I’m done for the day I just took the II 10mm CP3 off I might put the stock one on idk

 0 Comment(s)

[TexNeck]

Still following.

 0 Comment(s)

[Houston HB]

Still following.

Same also I am wondering if the pumps are activated electronically also.

I know they are gear driven but wondering.

 0 Comment(s)

[TexNeck]

Same also I am wondering if the pumps are activated electronically also.

I know they are gear driven but wondering.

There has to be some type of electronic component since the FCA dictates desired pressure.

 0 Comment(s)

[Shane09]

There has to be some type of electronic component since the FCA dictates desired pressure.

I gave it another go and got a lil flow coming out of the CP3 so I hooked it to the rail and cracked fuel line number one and had someone crank it and it pushed some air bubbles out and some fuel but not a lot of pressure.

 0 Comment(s)

[TexNeck]

I gave it another go and got a lil flow coming out of the CP3 so I hooked it to the rail and cracked fuel line number one and had someone crank it and it pushed some air bubbles out and some fuel but not a lot of pressure.

Is there better flow coming to the pump than out of the pump?

Be careful cracking the lines- there’s a lot of pressure that should be coming through there so you will not only make a mess in a hurry but could get hurt by the pressurized fuel.

 0 Comment(s)