Rare but it happens.
What brand CP3?
It’s coming out CP3 much slower than the feed line going into it correct?
Rare but it happens.
What brand CP3?
It’s coming out CP3 much slower than the feed line going into it correct?
2013 Ram 2500
John 3:16 - Philippians 4:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
mike@ddpmotorsports.com
www.ddpmotorsports.com
Industrial injection and yea it’s barley coming out
Wonder if I changed the FCA plug
If you unplug the FCA it should command it wide open
2013 Ram 2500
John 3:16 - Philippians 4:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
mike@ddpmotorsports.com
www.ddpmotorsports.com
Still nothing I’m stumped
If you can get a fuel pressure gauge from your local auto store- Fass has a 1/8npt port on it which you can hook a gauge to, you should confirm you’re making 16+ psi at the pump. If yes then your CP3 is definitely the issue and you’ll need to get in touch with II
2013 Ram 2500
John 3:16 - Philippians 4:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
mike@ddpmotorsports.com
www.ddpmotorsports.com
I definitely appreciate the help cause I was so ready to go drive down the road
You’re welcome- Keep us posted
2013 Ram 2500
John 3:16 - Philippians 4:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
mike@ddpmotorsports.com
www.ddpmotorsports.com
im just going out on a limb here and say S&S CP3 never had a issues.
Yea I was wanting one and I went a lil cheaper and this is what happened ??*??
Bookmarks