Seems impossible to find a good EGR Delete now.
Also, want a good grid heater delete to use with the stock intake.
Seems impossible to find a good EGR Delete now.
Also, want a good grid heater delete to use with the stock intake.
I’m sure some others may disagree but most of what I’ve read.
A grid heater delete does little to effect the flow rate
Sent from my iPhone using Tapatalk
I agree with your conclusion assuming the original grid heater is clean and soot free.
Other reasons for deleting it could be to eliminate the killer bolt and maximum flow with high HP applications.
Just my thoughts.
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit and 50 Gallon auxiliary fuel tank.
Sent from my iPad using Tapatalk
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.
Depends on how many miles are on the engine with the EGR functioning.
If the truck is 100K with EGR operating, that grid heather is plugged with carbon.
If you don't live anywhere, or have any intentions of traveling to, a place where it gets well below 0, a grid heater is not necessary.
2021 3500 Mega HO DRW
I’m in it more to get rid of the bolt.
https://www.glacierdieselpower.com/c...idheaters.html
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit and 50 Gallon auxiliary fuel tank.
Sent from my iPad using Tapatalk
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.
I purchased most of my stuff from eBay, EGR, Throttle Valve and exhaust pipes, $220.
Grid heater delete plate (billet aluminum) eBay $65.
New intake horn and heater delete plate gaskets from Geno's Garage (Can't remember the cost )but was a good price.
I needed to modify the exhaust block off plates by adding a better quality gasket and a flat washer to the top side to prevent the nut from bottoming out on the shoulder of the stud. All works great!
EGR.jpg
'11 2500 Laramie CCSB 4x4, H&S deletes, 35x12.5 Ridge Grapplers on 20" Motometals (SOLD)
'17 3500 Laramie Megacab 4x4 DRW, Blessed By DRD, Grid Heater Delete, Bulletproof 68 kit, ATS Thermo bypass, Mud Flaps
'17 Vengeance 320A Toy Hauler
Enjoying Life One Day at a Time.
I did the same just getting to install here recently.
2016 Ram 2500 CCSB 4X4 ,Cat fuel filter delete with water seperator. Thuren suspension
with Fox IFP shocks, thuren sway bar, rear track bar and front track bar, Warn 12k winch , custom winch mount, REVMAX trans pan,HD valve body and thermal bypas. Leer truck topper,Exotic head studs, Engine enhancements by the cummins whisper.
Bookmarks