Anyone had any issues with this code?
I have changed the fuel filters, lift pump, and there is a rail plug already in place.
Any advice would be greatly appreciated.
Anyone had any issues with this code?
I have changed the fuel filters, lift pump, and there is a rail plug already in place.
Any advice would be greatly appreciated.
Only things left are FCA and pump.
Sent from my iPhone using Tapatalk
I agree with above.
Purchase at a local Cummins dealer.
If you don't have one local shoot me a PM and I can get one sent your way.
The dealer way over charges for these!
2013 Ram 2500
John 3:16 - Philippians 4:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
mike@ddpmotorsports.com
www.ddpmotorsports.com
Agreed, I guess you could add injector leakage also but I would think other codes should be present.
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit and 50 Gallon auxiliary fuel tank.
Sent from my iPad using Tapatalk
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit, Cold Air Intake, City Diesel Actuator and 50 Gallon Aux Fuel Tank.
I haven’t seen it be injector leakage yet.
Most common I’ve found has been filters or FCA.
Sent from my iPhone using Tapatalk
Are you able to monitor rail pressure?
2013 Ram 2500
John 3:16 - Philippians 4:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
mike@ddpmotorsports.com
www.ddpmotorsports.com
I do not have any way to monitor the pressure.
My mechanic seems to think its around the injectors or tubes.
I mentioned to him about the pump and he said if it was the pump I would be having issues with the truck not wanting to start too.
Have you had the wait to start light come on at all while driving down the road?
2013 Ram 2500
John 3:16 - Philippians 4:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
mike@ddpmotorsports.com
www.ddpmotorsports.com
Just wanted to update anyone who may have the same problem.
My mechanic pulled all the injectors to check them but found no issue. He torqued them to spec and also torqued all the tubes to spec.
Problem solved.
Great News - I guess! (That the problem was actually fixed)
Even though nothing drastically wrong was found.
So was it kind of a injector 0-Ring leaking - since they were possibly not torque to spec?
I'm not savvy on this type of trouble shooting.
2017 Bighorn (Delmonico Red & Chrome) CC-HD2500-4WD-6.7L-3:42w/Anti-Spin
Oil: -SHELL- Rotella T6 5W-40 & T5 15W-40 combo w/LF16035
68RFE/BW44-46/Power Steering: -Red Line- C+ ATF
Frontend & Rearend: -Red Line- SAE GL-5 75W-90NS
Many Small Mods: Interior & Exterior
Mileage: 28,541
Bookmarks