Thanks Thanks:  1
Likes Likes:  3
Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20

Thread: Who Is Running 37x11.5 Nittos?

  1. Top Of Page | #11
    Crshanta's Avatar

    User Info Menu

    Re: Who Is Running 37x11.5 Nittos?

    Quote Originally Posted by 6.7 Coal Train View Post
    I don't think that would look very good, but all personal preference obviously.
    Looking for options on my winter set.

    Looking to change the gear set to 4.56’s and run 37’s and seeing what is out there for running 37’s on the stock wheels.

    2018 srw 3500

  2. Top Of Page | #12
    Crshanta's Avatar

    User Info Menu

    Re: Who Is Running 37x11.5 Nittos?

    Quote Originally Posted by Tugvi View Post
    I run 295/65/20 so 35.1x11.6x20 love it!

    Fits width of wheel well perfectly and throws no mud on side of truck.

    When offroad can air down to teens and get a plenty big footprint for mud/sand.
    @Tugvi

    Willing to post up a couple of pictures at lock showing clearance at the radius arm and sway bar?

    It would really be great if you could get a gap measurement at each point.

    The tires I am looking at will be just under 1/2” closer than your set.

    2018 srw 3500

  3. Top Of Page | #13
    Tugvi's Avatar

    User Info Menu

    Re: Who Is Running 37x11.5 Nittos?

    5D72376C-3B42-4ED2-83DB-9A4538092444.jpg
    Quote Originally Posted by Crshanta View Post
    @Tugvi

    Willing to post up a couple of pictures at lock showing clearance at the radius arm and sway bar?

    It would really be great if you could get a gap measurement at each point.

    The tires I am looking at will be just under 1/2” closer than your set.
    Didn’t have a tape with me but will get the measurements later today. Here are some photos. You can see in some cases it will just barely kissing the radius arms but I wouldn’t say that it really rubs.CDC65CC1-EAE1-4B1F-B28E-1518886BD7C5.jpg


  4. Top Of Page | #14
    Tugvi's Avatar

    User Info Menu


  5. Top Of Page | #15
    Tugvi's Avatar

    User Info Menu

    Re: Who Is Running 37x11.5 Nittos?

    1 1/16 inch from tire to radius arm at closest point and 2 inches from sway bar to tire full turn.


  6. Top Of Page | #16
    Daily Grinding! RamIt's Avatar

    User Info Menu

    Re: Who Is Running 37x11.5 Nittos?

    I’m running 37x12.5x17 ridge grapplers on my 19. No rubbing at all on my Method 105s.

    2021 3500 Mega HO DRW

  7. Top Of Page | #17
    Crshanta's Avatar

    User Info Menu

    Re: Who Is Running 37x11.5 Nittos?

    Quote Originally Posted by Tugvi View Post
    1 1/16 inch from tire to radius arm at closest point and 2 inches from sway bar to tire full turn.
    Thanks for checking and the photos. I think it is going to be close enough to try. Will update this post once the tires are mounted in the spring or summer.

    2018 srw 3500

  8. Top Of Page | #18
    Crshanta's Avatar

    User Info Menu

    Re: Who Is Running 37x11.5 Nittos?

    @RamIt

    What is your wheel offset?

    There is a pretty good data set on wheels with offsets between +18 and +27 to run 37x12.5’s with minor trimming and some can run 38’s.

    On the other hand, those with stock wheels seem to land on an 35x11.5 or 35x12.5 (With some sway bar and radius arm rubbing) as max tire.

    2018 srw 3500

  9. Top Of Page | #19
    Tugvi's Avatar

    User Info Menu

    Re: Who Is Running 37x11.5 Nittos?

    Quote Originally Posted by Crshanta View Post
    Thanks for checking and the photos. I think it is going to be close enough to try. Will update this post once the tires are mounted in the spring or summer.
    You’re welcome and should be space, but not much.

    If nothing else an excuse to get carli radius arms with the notch cut out.


  10. Top Of Page | #20
    Daily Grinding! RamIt's Avatar

    User Info Menu

    Re: Who Is Running 37x11.5 Nittos?

    Quote Originally Posted by Crshanta View Post
    @RamIt

    What is your wheel offset?

    There is a pretty good data set on wheels with offsets between +18 and +27 to run 37x12.5’s with minor trimming and some can run 38’s.

    On the other hand, those with stock wheels seem to land on an 35x11.5 or 35x12.5 (With some sway bar and radius arm rubbing) as max tire.
    0 offset/4.75" BS.

    Only had to trim off the little nub that protrudes from the front mudflap thing behind the front wheels & reformed the fender liner with a heat gun.

    Zero rubbing issues since unless I start going full travel with the suspension.

    If I'm bottomed out the tires scrub, but that's to be expected.

    2021 3500 Mega HO DRW

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •