Looking for options on my winter set.
Looking to change the gear set to 4.56’s and run 37’s and seeing what is out there for running 37’s on the stock wheels.
Looking for options on my winter set.
Looking to change the gear set to 4.56’s and run 37’s and seeing what is out there for running 37’s on the stock wheels.
2018 srw 3500
@Tugvi
Willing to post up a couple of pictures at lock showing clearance at the radius arm and sway bar?
It would really be great if you could get a gap measurement at each point.
The tires I am looking at will be just under 1/2” closer than your set.
2018 srw 3500
5D72376C-3B42-4ED2-83DB-9A4538092444.jpgDidn’t have a tape with me but will get the measurements later today. Here are some photos. You can see in some cases it will just barely kissing the radius arms but I wouldn’t say that it really rubs.CDC65CC1-EAE1-4B1F-B28E-1518886BD7C5.jpg
1 1/16 inch from tire to radius arm at closest point and 2 inches from sway bar to tire full turn.
I’m running 37x12.5x17 ridge grapplers on my 19. No rubbing at all on my Method 105s.
2021 3500 Mega HO DRW
Thanks for checking and the photos. I think it is going to be close enough to try. Will update this post once the tires are mounted in the spring or summer.
2018 srw 3500
@RamIt
What is your wheel offset?
There is a pretty good data set on wheels with offsets between +18 and +27 to run 37x12.5’s with minor trimming and some can run 38’s.
On the other hand, those with stock wheels seem to land on an 35x11.5 or 35x12.5 (With some sway bar and radius arm rubbing) as max tire.
2018 srw 3500
You’re welcome and should be space, but not much.
If nothing else an excuse to get carli radius arms with the notch cut out.
0 offset/4.75" BS.
Only had to trim off the little nub that protrudes from the front mudflap thing behind the front wheels & reformed the fender liner with a heat gun.
Zero rubbing issues since unless I start going full travel with the suspension.
If I'm bottomed out the tires scrub, but that's to be expected.
2021 3500 Mega HO DRW
Bookmarks