Good morning!
Will be removing my EGR system shortly on my 2013 6.7 and have a quick question on the coolant bypass hose. When I look at most of the kits out there they accomplish three things:
1 - block off plates for the intake air horn port. I don't require this as I've ordered a new air horn which will also replace the throttle plate.
2 - block off the exhaust manifold ports. I'll need these.
3 - bypass the coolant. This seems to be the only place where leaks can occur. Is it possible to plug the head and the three way connector in some fashion?
Thanks!
Steve
Bookmarks