Got my truck all riped apart cause im changing the vp **** these things are expencive hope to have ot running by weeks end ..... Does any one kno how to release the pressure safely
Thanks: 0
Likes: 0
Got my truck all riped apart cause im changing the vp **** these things are expencive hope to have ot running by weeks end ..... Does any one kno how to release the pressure safely
This is a good question. I would like to know too
Release the pressure?
DAP and Thoroughbred diesel can both get you a VP for under $1000.
I highly recommend an aftermarket lift pump rated at at least 100gph. Also good to make sure the support bracket for the VP44 is in place. Trucks will eat VPs if that bracket is missing.
Replace your lift pump too.
If he's talking about the injector lines, you just remove them, no need to release pressire
iv taken apart 3 of the first gen motors, never once released pressure from the pump. just loosen off all your lines and have a pail underneath the main fuel line into the pump for excess fuel.
Posting Permissions
Register To Reply
Bookmarks