Got a leak that needs addressing. Any ideas what seal I need to replace? 2012 6.7
Got a leak that needs addressing. Any ideas what seal I need to replace? 2012 6.7
2012 Laramie Megacab 4x4 68RFE "Big Stupid", 4.5 in Rancho Lift, 18 in Procomp Black Stryker
35 in Toyo M/Ts, Single "Tow" Tune with Trans Tune, EGR Delete; DPF Delete, Custom 4 in Race Pipe (Stock Muffler)
S&B Intake, Moog Steering Links and U-Joints, Dynatrac Ball Joints, Yukon Free-Spin Kit
I would say rear main seal but hard to tell.
2016 Ram 3500 CC 4x4, G56, Dr. DRD medically cured
2016 RAM 3500 4x4 Laramie Crew Cab ,G56
I stopped a leak like that by tightening pan bolts up once. It was not on a Cummins but might be worth checking.
Sent from my SM-A505U using Tapatalk
2015 Black Laramie CCSB 3500 SRW. Thuren Leveled With Fox 2.0 Shocks. Ride Rite Rear Air Bags With Wireless Airlift Onboard Air. 35" Toyos. All The Options Minus The Soot Cookers. RaceMe Ultra.
Looks like rear main to me.
I would keep it clean every so often - as long as no drips on driveway then I wouldn’t worry about it if it were my truck.
2013 Ram 2500
John 3:16 - Philippians 4:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
mike@ddpmotorsports.com
www.ddpmotorsports.com
It looks like a valve cover seal.
It's what I had fail on mine and the leak looked identical.
Bookmarks