What kit is that?
And is front fuel filter deleted then or still there?
What kit is that?
And is front fuel filter deleted then or still there?
2017 2500 Laramie: DRD Juiced, 5" TBE, Invisible EGR mod, BD Iron Horn 364sxe/1.0AR, 20x10 Hostile Sprockets, 33x12.50 General Grabber A/T, HID Conversion, Reverse Level 2" Drop CSS Rear Coils
The exact kit is this: https://dieselfuelfilterkits.com/13_...ilter_kit.html
As of this moment yes the front filter is on only because I am running 0750 rear Cat filter.
I plan to delete the front filter when my water separator is due, also got the delete kit from the same person. (It's an option on the bottom of the page.)
That 0750 is going to be replaced by that big blue filter DBF5817, then the factory Mopar water separator is going to be replaced with P551833.
Synergy Steering brace, Draglink, & Tie Rod, Thuren front leveling coils & Track bar, 5160 Bilstein Shocks, Banks CAI intake, LED everything, projector headlights, dieselfuelfilterkits, Steelcraft Line-x Door Sills, Elevation Front Bumper with Line-x Pro.
This is awesome info everyone!
i just ordered the BMP front spin on and will keep the rear stock filter.
DBF5817 in the front
P551833 in the rear
What kind of Micron filtration would I get with a setup like that and would the big filter fit up front on the block?
@CDIJeff
I see no reason it won't unless something is changed to block the area near the front filter.
Here is a link of someone using the Cat version 416-1225 from another forum changed it to a link shortener to not name that forum.
https://bit.ly/3kDQQrt
Only difference from your kit is they are using GDP instead of BMP
The front filter is a 5 micron and the 5817-5814 are 4 and the efficiency rating for Donaldson is 99.9.
Synergy Steering brace, Draglink, & Tie Rod, Thuren front leveling coils & Track bar, 5160 Bilstein Shocks, Banks CAI intake, LED everything, projector headlights, dieselfuelfilterkits, Steelcraft Line-x Door Sills, Elevation Front Bumper with Line-x Pro.
Thank you.
Much appreciated.
One more question? How often does everyone change the front/rear fuel filters with the improved filtration compared to stock?
Was searching the Donaldson website for more info found two more oversized blue water spectators even bigger then the P550901 and they say are a higher filtration level.
The numbers are P553207 (SAE) P553217 (ISO) I still won't switch out my rear factory water separator as I rather keep my factory sensor but not a bad setup for Fass/Airdog setup.
Synergy Steering brace, Draglink, & Tie Rod, Thuren front leveling coils & Track bar, 5160 Bilstein Shocks, Banks CAI intake, LED everything, projector headlights, dieselfuelfilterkits, Steelcraft Line-x Door Sills, Elevation Front Bumper with Line-x Pro.
Since I don't drive the truck too much 5k oil 10k fuel, even with the new filters I have yet to put in.
Synergy Steering brace, Draglink, & Tie Rod, Thuren front leveling coils & Track bar, 5160 Bilstein Shocks, Banks CAI intake, LED everything, projector headlights, dieselfuelfilterkits, Steelcraft Line-x Door Sills, Elevation Front Bumper with Line-x Pro.
I change mine every 10,000 or 1 year which ever comes first for fuel and oil.
2016 Ram 3500 CC 4x4, G56, Dr. DRD medically cured
2016 RAM 3500 4x4 Laramie Crew Cab ,G56
Just realized my own mistake that the BMP kit allows for the factory WIF sensor and they have a adapter to retain the factory heater plug.
I really doubt I need it with the oversized fuel filter. Also with the two kits it would be $334 before a Donaldson filter.
https://blackmarketperformance.com/c...-adapter-13-18
https://blackmarketperformance.com/c...er-coming-soon
Also for those wondering the reason I chose my rear kit over the BMP front cat filter setup, was it just looked easier to change in the future with it being under the bed instead of with the motor.
Synergy Steering brace, Draglink, & Tie Rod, Thuren front leveling coils & Track bar, 5160 Bilstein Shocks, Banks CAI intake, LED everything, projector headlights, dieselfuelfilterkits, Steelcraft Line-x Door Sills, Elevation Front Bumper with Line-x Pro.
Bookmarks