Thanks Thanks:  1
Likes Likes:  7
Results 1 to 5 of 5

Thread: Door Panels

  1. Top Of Page | #1

    Door Panels

    Has anyone upgraded or redone your door panels?

    I have a 2015 Tradesman Crew and I would like to upgrade mine or put some padding on them.

    Just make them a little more plush.


  2. Thanks AnOldBiker thanked for this post
    Likes AnOldBiker, 6.7 Coal Train liked this post
  3. Top Of Page | #2
    Old... But Still Here! AnOldBiker's Avatar

    User Info Menu

    Re: Door Panels

    @rkf63k10

    Sorry can't help, never upgraded the door panels. Never heard of anyone doing it .... yet.



    Jim


    2006 ~ 2500HD, Big Horn Edition, 5.9, 4x4, Q/Cab, 48RE, L/B, 3.73, S&B CAI & Snout, ProFlo 5" S/S exhaust, Smarty Touch, Oil ByPass Kit, 60 gal main tank, 110 gallon in-bed tank, XX-Fuel Filter System, Coolant Bypass Kit, Mag-Hytec front & rear end covers and trans pan, 285 x 70 x 17

    "Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children’s children what it was once like in the United States, where men 'were' free." ~ Ronald Regan

  4. Top Of Page | #3
    Noneck's Avatar

    User Info Menu

    Re: Door Panels

    Might be cheaper to get Laramie door panels off eBay or something?

    Sent from my SM-G965U using Tapatalk

    2013 Laramie 2500 CC. Warp tuning on RaceMe. 2 inch level w/35s.

  5. Likes 6.7 Coal Train liked this post
  6. Top Of Page | #4
    No Vacancy Power247's Avatar

    User Info Menu

    Re: Door Panels

    Welcome to the forum!

    I agree with @Noneck that sourcing some used panels from eBay or a parts yard will be the easiest route.

    Most of the components of the door panel is plastic-welded making it very difficult to just replace parts.

    Pull one and look at it from the back side to see what your options are.

    Greg
    2019 | RAM 2500 | CCSB | 6.4 HEMI
    2016 | Heartland Pioneer | DS310

    All new members, please read the link below about (FREE) member account privileges.
    https://www.igotacummins.com/threads...S-PLEASE-READ!

    Greg
    2019 | RAM 2500 | CCSB | 6.4 HEMI

  7. Likes Noneck, 6.7 Coal Train liked this post
  8. Top Of Page | #5
    6.7 Coal Train's Avatar

    User Info Menu

    Re: Door Panels

    Yea, I'd definitely just look for some Laramie panels and would bet they would pop right in.

    In the same vane.

    I was contemplating having more of my Laramie dash wrapped in leather to get rid of more of the hard cheap plastic.

    Not sure how it would fit back together though with the added thickness.

    2017 2500 Laramie: DRD Juiced, 5" TBE, Invisible EGR mod, BD Iron Horn 364sxe/1.0AR, 20x10 Hostile Sprockets, 33x12.50 General Grabber A/T, HID Conversion, Reverse Level 2" Drop CSS Rear Coils

  9. Likes Power247, SKIBBEE4thGEN liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •