Thanks Thanks:  2
Likes Likes:  14
Results 1 to 8 of 8

Thread: Need A New Tuner: Edit - Ordered a MM3

  1. Top Of Page | #1
    GR128's Avatar

    User Info Menu

    Need A New Tuner: Edit - Ordered a MM3

    Hello everyone, I'm new here.

    I have an 08 Cummins that has been deleted since 2012.

    I have been using a H&S Mini Maxx with overdrive transmission tuning for my revmax 550 transmission.

    There MM has recently started acting up and is currently in recovery mode from what I believe is a bad SD card.

    I am unable to find SD card files for ver. 6.7.50. The truck is running fine, but I do have a check engine light and a few codes.

    I think it's time for a new tuner. Hopefully the MM will let me return the truck to stock, but I don't want to try until I have a new tuner in hand.

    What is recommended now days?

    I pretty much quit following tuning once I found a setup I was happy with.

    I usually run with a mild HP increase (60-80hp) and would like something with trans. tuning.

    Any suggestions?

    Thank you,

    GR


  2. Thanks watersupply189 thanked for this post
    Likes watersupply189, AK Bob, Thomas1960 liked this post
  3. Top Of Page | #2
    No Vacancy Power247's Avatar

    User Info Menu

    Re: Need A New Tuner: Edit - Ordered a MM3

    Welcome!

    There are a few newer tuning options available on platforms such as MM3, EFILive & EZLynk.

    Loads of information on all 3 is out there once you start looking.

    All new members, please read the link below about (FREE) member account privileges.
    https://www.igotacummins.com/threads...S-PLEASE-READ!

    Greg
    2019 | RAM 2500 | CCSB | 6.4 HEMI
    2016 | Heartland Pioneer | DS310

    Greg
    2012 CCSB Big Horn 4x4 3.73|Tuned by Double R Diesel

  4. Likes watersupply189, AK Bob, Thomas1960 liked this post
  5. Top Of Page | #3
    Senior Member watersupply189's Avatar

    User Info Menu

    Re: Need A New Tuner: Edit - Ordered a MM3

    Welcome friend.


    2016 Ram Laramie 3500 (DRD), G56, 6.7, Rough Country Leveling, HID headlights, Morimoto LED fogs plus a whole lot more!

    2016 Ram 3500 4x4 Laramie Crew Cab
    Cummins (DRD), G56, Rough Country level, Morimoto LED fog lights ,35W HID headlights, Lund Attitude Steps w/Line-X, DRL's Activated, 35x11.50R18 Falken Wildpeak, Fuel Vapor Wheels Matte Black w/Dark Tint, A.R.E. Truck cap

    2015 Jeep Grand Cherokee Limited 4x4
    2019 Dodge Charger 392 Scatpack Plus

    Past - 2014 Ram 1500 4x4 Lone-Star Eco Diesel

  6. Likes AK Bob, Thomas1960 liked this post
  7. Top Of Page | #4
    AK Bob's Avatar

    User Info Menu

    Re: Need A New Tuner: Edit - Ordered a MM3

    Welcome!


    2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, 50 Gallon auxiliary fuel tank.

    Sent from my iPad using Tapatalk

    2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. MM3 tuned by Double R Deisel. Oil Bypass Filter, 50 Gallon auxiliary fuel tank.

  8. Likes watersupply189, Thomas1960 liked this post
  9. Top Of Page | #5
    Thomas1960's Avatar

    User Info Menu

    Re: Need A New Tuner: Edit - Ordered a MM3

    Welcome aboard!!!!!!!!!!!!!


  10. Likes watersupply189 liked this post
  11. Top Of Page | #6
    GR128's Avatar

    User Info Menu

    Re: Need A New Tuner: Edit - Ordered a MM3

    Thanks for all the welcomes everyone!

    I decided to ditch the Mini and I ordered a MM3 from DRD.

    It should be here next week.

    I also ordered a Pyro.

    I'm hoping that I can just connect my existing probe to the new "box" that comes with the MM3 Pyro.

    As far as I can tell it should work.

    I'm not sure how easily the actual probe would be to remove form the manifold since it's been in there for several years.

    Either way I'm sure it will all work out and I'm excited for the new tuning!


  12. Thanks watersupply189 thanked for this post
    Likes watersupply189 liked this post
  13. Top Of Page | #7
    Big Daddy IGOTACUMMINS's Avatar

    User Info Menu

    Re: Need A New Tuner: Edit - Ordered a MM3

    Quote Originally Posted by GR128 View Post
    Thanks for all the welcomes everyone!

    I decided to ditch the Mini and I ordered a MM3 from DRD.

    It should be here next week.

    I also ordered a Pyro.

    I'm hoping that I can just connect my existing probe to the new "box" that comes with the MM3 Pyro.

    As far as I can tell it should work.

    I'm not sure how easily the actual probe would be to remove form the manifold since it's been in there for several years.

    Either way I'm sure it will all work out and I'm excited for the new tuning!
    The old Pyro won't work friend.

    God bless,
    igotacummins

    "The grass is greener where you water it"


  14. Likes watersupply189 liked this post
  15. Top Of Page | #8
    HKBIGDADDYDIESELDAN's Avatar

    User Info Menu

    Re: Need A New Tuner: Edit - Ordered a MM3

    Welcome to the family you made the right choice with going to DRD and MM3 you’ll love it

    2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
    Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs

  16. Likes watersupply189 liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •