Thanks Thanks:  1
Likes Likes:  4
Results 1 to 5 of 5

Thread: Smarty TNT-R Removal

  1. Top Of Page | #1

    Smarty TNT-R Removal

    I have a older smarty s06 for a 2003 5.9 cr with loaded tnt-r on it.

    The base hp tune is 130hp.

    Can I update my smarty back to the basic revo tunes that go 30 hp and up?

    I'd like to use the 30hp for towing and wifh the TNT-R tunes it starts at a minimum of 130hp tune.

    Also if u update software would it have any effects on the tunes currently on the device?


  2. Thanks AnOldBiker thanked for this post
    Likes AnOldBiker liked this post
  3. Top Of Page | #2
    No Vacancy Power247's Avatar

    User Info Menu

    Re: Smarty TNT-R Removal

    Quote Originally Posted by Shadow22 View Post
    I have a older smarty s06 for a 2003 5.9 cr with loaded tnt-r on it.

    The base hp tune is 130hp.

    Can I update my smarty back to the basic revo tunes that go 30 hp and up?

    I'd like to use the 30hp for towing and wifh the TNT-R tunes it starts at a minimum of 130hp tune.

    Also if u update software would it have any effects on the tunes currently on the device?
    Welcome to the forum.

    Getting support on that old unit is going to be tough.

    There just aren't many of them around anymore.

    You are doing the right thing by making sure you know what you are getting into before you update.

    Hopefully someone with experience will chime in shortly.

    Greg
    2019 | RAM 2500 | CCSB | 6.4 HEMI
    2016 | Heartland Pioneer | DS310

    Greg
    2019 | RAM 2500 | CCSB | 6.4 HEMI

  4. Likes AnOldBiker liked this post
  5. Top Of Page | #3

    Re: Smarty TNT-R Removal

    Worst case scenario I'll just run the 130 base tune. then go back to stock to pull the 5th wheel. I have a predator with power puck but its junk in my opinion compared to this smarty.


  6. Likes AnOldBiker liked this post
  7. Top Of Page | #4
    Old... But Still Here! AnOldBiker's Avatar

    User Info Menu

    Re: Smarty TNT-R Removal

    @Shadow22

    I'd check with Smarty 1st

    https://smartyresource.com/



    Jim


    2006 ~ 2500HD, Big Horn Edition, 5.9, 4x4, Q/Cab, 48RE, L/B, 3.73, S&B CAI & Snout, ProFlo 5" S/S exhaust, Smarty Touch, Oil ByPass Kit, 60 gal main tank, 110 gallon in-bed tank, XX-Fuel Filter System, Coolant Bypass Kit, Mag-Hytec front & rear end covers and trans pan, 285 x 70 x 17

    "Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children’s children what it was once like in the United States, where men 'were' free." ~ Ronald Regan

  8. Top Of Page | #5

    Re: Smarty TNT-R Removal

    10-4. I didn't know if they had support for them.

    Mine looks totally different than the newer MADS s-06 but I'll see what they say.


  9. Likes AnOldBiker liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •