Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: Bushings Bad?

  1. Top Of Page | #1
    WhiskeyBuzz's Avatar

    User Info Menu

    Bushings Bad?

    These are looking rough.. has barely over 100K.

    I'm opting for replacing.

    Question is, can I do this or should I take it somewhere?

    Any suggestions for replacements?





    Sent from my SM-N950U1 using Tapatalk

    2012 RAM SLT 2500 HO | Deleted | S&B CAI | MM3 DRD | 35x12.50R20 Nitto Ridge Grapplers on 645 Dropstars

  2. Top Of Page | #2
    DIESELWRKS's Avatar

    User Info Menu

    Re: Bushings Bad?

    So what exact end joints are you saying are bad?

    The Tie Rod ends (Joints) that connect from pass side to driver side at the knuckles, as well as the tie rod end that comes off the pitman arm to drag link bar?

    The tie rod end from drag link bar that connects to your lower cross over bar.

    You can replace those tie rod ends yourself but you want to get an alignment if you don't want to align it yourself.

    You can go on Rockauto.com and they will show pictures.

    2017 WON TON CC LB 68AUTO
    Secret stuff that make it vroom and whistle better Thuren 2.25 w/2.0 Fox Resi

    Justin
    Southern Oregon ( the Republican part)
    UNITEDSTATES MARINE CORPS 1993-2007
    No better friend, No better enemy.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •